8
Adjust the general settings
ON REMOTE
1 Display setup menu
SETUP
Select a desired option on the first level
U u
Move to second level
i
4 Select a desired option on the second level
U u
5 Move to third level
i
6 Change the setting
U u
and ENTER
OSD Initial language setting - Optional
1 Turn the power on
The language list appears
POWER
Select the language
U u I i
Press
ENTER
4 To confirm press
I i
and ENTER
During the first use of this unit, the initial language setup menu
appears on your TV screen. You must complete initial language
selection before using the unit. English will be selected as the initial
language.
ON REMOTE
Initial Setting the Area Code
1 Display setup menu
SETUP
Select LOCK menu on the first level
U u
Move to second level
The activated Area Code appears on the
second level.
i
4 Move to the third level
i
5 Enter a new password
numerical buttons
(0-9) and ENTER
6 Recheck the entered new password
numerical buttons
(0-9) and ENTER
7 Select a code for a geographic area
After select, Rating and Password will be
U u I i
and
activated. (
page 19
)
ENTER
8 To confirm what you press
Make sure to finish setting the Area Code
before leaving the setup menu if you cannot
set the rating and Password
ENTER
When you use this unit for the first time, you have to set the Area
Code as shown below.
ON REMOTE
Adjust the general settings - More you can do
Adjust the language settings
OSD –
Selects a language for the Setup menu and on-screen display.
Disc Audio/ Disc Subtitle/ Disc Menu –
Selects a language for the Audio/ Menu/
Subtitle.
[Original]: Refers to the original language in which the disc was recorded.
[Others]: To select another language, press number buttons then
ENTER
to
enter the corresponding 4-digit number according to the language
code list in the reference chapter.
Refer to the language code on
Page 19
.
[OFF] (for Disc Subtitle): Turn off Subtitle.
MDS804-A0U.DNGAFLK_ENG_6114.indd8 8
2009.7.7 1:53:0 PM
