Operation
18 Room Air Conditioner
Power
Temp
Fan Speed
Timer
Mode
Energy
Saver
1
4
2
6
3
5
1
6
5
4
2
3
7
CAUTION: When the air conditioner has completed its cooling operation and is
turned off or set to the fan position, wait at least 3 minutes before resetting to the
cooling operation again.
1. POWER BUTTON
To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.
This button takes priority over any other buttons.
2. OPERATION MODE SELECTION BUTTON
Everytime you push this button, it will toggle COOL, FAN and DRY.
3. ON/OFF TIMER BUTTON
Everytime you push this button, timer is set as follows.(1Hour
➔
2Hours
➔
3Hours
➔
4Hours
➔
5Hours
➔
6Hours
➔
7Hours
➔
8Hours
➔
9Hours
➔
10Hours
➔
11Hours
➔
12Hours
➔
Cancel)
4. FAN SPEED SELECTOR
Everytime you push this button, it is set as follows. (Hi[ F3 ]
➔
Low[ F1 ]
➔
Med[ F2 ]
➔
Hi[ F3 ]....)
5. ROOM TEMPERATURE SETTING BUTTON
This button can automatically control the temperature of the room. The temperature can be set within a range
of 60°F to 86°F by 1°F.
Select the lower number for lower temperature of the room.
6. ENERGY SAVER
The fan stops when the compressor stops cooling.
Approximately every 3 munutes the fan will turn on and check the room air to determine if cooling is needed.
7. REMOCON SIGNAL RECEIVER
Summary of Contents for LWC121CGMK0
Page 39: ...Service Manual 39 Memo ...