manualshive.com logo in svg

LG LVW900 series, User Manual

Share
Download
LG LVW900 series User Manual Download Page 35

Operation and settings

 

35

4.   Select the authority drop down list to provide 

the access rights to each user and then click the 
[Save] to confirm your selection.

Administrator: Allows you to operate setup 

 

-

menus and to view live images.

Power user: Use of the limited functions of 

 

-

the system (The Configuration menu is not 
allowed. A power user can use the Live View, 
OSD control and audio functions. 

Normal user: Provides the lowest level of 

 

-

access, Allows to view live images only.

Custom user: The user can login and view 

 

-

the live stream image only when the “Enable 
anonymous login” option is checked to 
enable it. 

Note:

Remember the password.

Edit the registered user

 

>

You can change the password or authority.

1.   Choose the user ID and then click the [Edit] but-

ton.

2.   Change the Password or Authority, then click the 

[Save] button to confirm your selection.

Delete the registered user

 

>

1.   Choose the user ID you want to delete.

2.   Click the [Remove] button.

Note: 

The default administrator user ID ‘admin’ is perma-
nent and cannot be deleted.

Anonymous

Enable anonymous login

 

>

Check the box to enable anonymous user login 
- allows the user access for only viewing the live 
stream image.

Maximum RTP stream connection

Maximum number of simultaneous stream connec-

 

>

tion

Set this number to limit the number of simultaneous 
stream connections. 

Note:

Preview window of the IP device setting and preset 
setting are affected by this setting.

Save: Click this button to confirm the settings.

• 

Summary of Contents for LVW900 series

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands