ENGLISH
50
•
Tune Command Examples:
1
Tune to the Analog antenna (PAL)
Programme 10.
Set ID = All = 00
Data 00 & 01 = Programme Data is 10 = 00
0a
Data 02 = Analog Antenna TV = 00
Result = ma 00 00 0a 00
2
Tune to the digital antenna (DVB-T)
Programme 01.
Set ID = All = 00
Data 00 & 01 = Programme Data is 1 = 00 01
Data 02 = Digital Antenna TV = 10
Result = ma 00 00 01 10
3
Tune to the satellite (DVB-S)
Programme 1000.
Set ID = All = 00
Data 00 & 01 = Programme Data is 1000 =
03 E8
Data 02 = Digital Satellite TV = 40
Result = ma 00 03 E8 40
Ack
[a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][x][a][ ][Set ID][ ][NG][Data 00][x]
* For South Korea, North/Latin America except
Colombia Model
►
To tune Programme to following physical/
major/minor number.
Transmission
[m][a][ ][0][ ][Data 00][ ][Data 01][ ]
[Data 02][ ][Data 03][ ][Data 04][ ][Data 05][Cr]
-
Digital Programmes have a Physical, Major,
and Minor Programme number. The Physical
number is the actual digital Programme
number, the Major is the number that the
Programme should be mapped to, and the
Minor is the sub-Programme. Since the ATSC
tuner automatically maps the Programme
from the Major / Minor number, the Physical
number is not required when sending a
command in Digital.
•
Analog Antenna/Cable
Data 00 : Physical Programme Number
- Antenna (ATV) : 02~45 (Decimal:
2 ~ 69)
- Cable (CATV) : 01, 0E~7D
(Decimal : 1, 14~125)
[Data 01 ~ 04]: Major/Minor Programme
Number
Data 01 & 02: xx (Don’t care)
Data 03 & 04: xx (Don’t care)
Data 05: Input Source (Analog)
- 00 : Antenna TV (ATV)
- 01 : Cable TV (CATV)
•
Digital Antenna/Cable
Data 00 : xx (Don’t care)
[Data 01][Data 02]: Major Programme Number
Data 01 : High byte Programme Data
Data 02 : Low byte Programme Data
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]: Minor Programme Number
Data 03 : High byte Programme Data
Data 04 : Low byte Programme Data
Data 05 : Input Source (Digital)
- 02 : Antenna TV (DTV) – Use
Physical Programme Number
- 06 : Cable TV (CADTV) – Use Physical
Programme Number
- 22 : Antenna TV (DTV) – Don’t Use
Physical Programme Number
- 26 : Cable TV (CADTV) - Don’t Use
Physical Programme Number
- 46 : Cable TV (CADTV) – Use Major
Programme Number Only (One Part
Programme)
* Two bytes are available for each major and
minor Programme data, but usually the low
byte is used alone (high byte is 0).
Summary of Contents for LU34 T Series
Page 53: ......
