ENGLISH
23
Configuration Setup
* Image shown may differ from your TV.
(1) Number of RCU
•
It is a function to set whether to use Select RCU or not and set number of RCU.
•
When Number of RCU is set to
0
, this function do not use.
•
Number of RCU value range 1~9
* RCU(Remote Control Unit) : It is special RCU that operates only setted number of RCU in TV.
(2) Splash Offset Time
•
Set the splash image display time
•
When
Splash Offset Time
is set to
Off
, TV logo(splash image) do not display.
•
The time can be set to between 0 and 10 seconds.
(3) USB Auto Playback
•
When
USB Auto Playback
is set to
Movie
, TV finds and plays the USB’s movie files located at the
root(top) directory Movies if USB is plugged in. (Some menu OSDs may prevent this function.)
•
When
USB Auto Playback
is set to
Photo
, TV finds and plays the USB’s photo files located at the
root(top) directory Photos if USB is plugged in. (Some menu OSDs may prevent this function.)
•
If it reaches the last file, it starts the first file again.
(4) Auto Teletext
•
Auto Teletext
function can be operated only in Australia.
•
If Auto Teletext is set to
On
, the teletext mode stays enabled even when the Programme signal
disappears on the teletext screen.
•
If Auto Teletext is set to
Auto
, the teletext mode is disabled when the Programme signal
disappears on the teletext screen.
(5) 15Min Auto Off
•
When
15Min Auto Off
is set to
On
, TV will turn off if there is no signal in 15Min.
Summary of Contents for LU34 T Series
Page 53: ......
