ENGLISH
30
(2) Forced Initialize
* Only for LU5**H series
•
If
Disable
is selected, a command should be sent and received between the TV and a -device for
proper initialization.
•
If
Enable
is selected, initialization is implemented when a device receives a command. If
initialization is not implemented, the TV remote control and local key will work.
(3) HTNG HotelMode
•
If the following options are selected because of the HTNG command:
* Power On Default, Start Volume, Maximum Volume, Minimum Volume, then the value for the
HTNG HotelMode changes automatically to
Enable
and, even if the HotelMode is set to
Off
, the
above options are still affected.
•
If you change it to
Disable
, then the values set by the HTNG will be canceled.
Power Saving
* Only for LU5**H series
* Image shown may differ from your TV.
1
Go to
General
->
Power Saving
.
(1) Static Saving
•
It is the item for setting the level to reduce the backlight control from the items for saving the
consuming power, which is increased or decreased by 10 steps from 0 to 100.
•
100 makes the consuming power set to the same one from the TV. 0 reduces the consuming
power to the minimum. The default value is 100.
•
The value displayed at the OSD is not changed and only the actual setting value is converted to
percentage based on the static saving value to set.
-
0
~
30
: HIGH,
40
~
60
: MID ,
70
~
90
: LOW,
100
: OFF
(2) Keyless Off Hours
•
Automatically TV will be turned off if there is no key input for the preset time period.
-
Set the
OFF
,
1
~
99
.
Summary of Contents for LU34 T Series
Page 53: ......
