LG LT703, Owner'S Manual

Page: 25 / 32

5
Operation
Exposure settings
Iris setting
Select the desired lens iris value for camera exposure.
Select [IRIS] option on the [EXPOSURE] menu, then
select a value. (AUTO or MANUAL).
AUTO: The lens iris is set automatically.
MANUAL: Use
[Near] or [Far] button to select the
DC Iris level.
AGC (Automatic Gain Control) setting
If the images are too dark, change the maximum
[AGC] value to make the images lighter.
1. Select [AGC] option on the [EXPOSURE] menu.
2. Use [Near] or [Far] button to select a mode.
(OFF
y
LOW
y
MIDDLE
y
HIGH)
WDR/BLC setting
Use WDR/BLC option to set the options for BLC or
WDR camera.
1. Select [WDR/BLC] option on the [EXPOSURE]
menu.
2. Use [Near] or [Far] button to select a mode then
press [Open] or [Close] .
WDR: Set the WDR limit.
•
•
•
WDR LEVEL: LOW
y
MIDDLE
y
HIGH
BLC: Set the BLC limit.
BLC LEVEL: LOW
y
MIDDLE
y
HIGH
HSBLC: Use for adjusting brightness the
specific area of picture. The HSBLC mode is
automatically activated only in low illuminance
scene.
AREA SETTING: Use [Near] or [Far] but-
ton to select a area then use [In] or [Out]
button to select a ON or OFF. Press [Open]
or
[Close]
to exit the area setting menu.
GRAY SCALE: Use [Near] or [Far] button
to select a gray scale.
(GRAY
y
D.GRAY
y
BLACK).
HS LEVEL: Use [Near] or [Far] button to
select a bright level. (5 level)
MASK STATE: Use
[Near]
or
[Far]
button
to select [ON] or [OFF].
If you set the MASK STATE to ON, the
mask function is activate only when the
HSBLC is activated by auto mode.
OFF: Not used.
BRIGHTNESS setting
You can increase the brightness of the darkened
video. If you set the brightness to lower value, the
image is darkened. If you set the brightness to higher
value, the image gets bright.
1. Select [BRIGHTNESS] option on the [EXPOSURE]
menu.
2. Use [Near] or [Far] button to set the bright level.
-
•
-
•
-
-
-
-
•