LG LT703, Owner'S Manual

Page: 12 / 32

1
Alarm Output Mode Setting
You can set the Alarm Output to the normal open or
normal close mode.
SW1 on IF board
ON
1 2 3 4 5 6 7 8
Alarm
Output
Number
Switch
Number
(Position)
Function Effect
1
1 (ON), 2 (OFF) Normal Open mode
1 (OFF), 2 (ON) Normal Close mode
2
3 (ON), 4 (OFF) Normal Open mode
3 (OFF), 4 (ON) Normal Close mode
3
5 (ON), 6 (OFF) Normal Open mode
5 (OFF), 6 (ON) Normal Close mode
4
7 (ON), 8 (OFF) Normal Open mode
7 (OFF), 8 (ON) Normal Close mode
Camera ID Setting
If you want to use multiple cameras, you should set
camera IDs differently by using the 8-bit Dip switch for
each camera.
Set the camera ID setting referring to the pictures and
the table on the below.
• The default setting of the camera ID is 0.
SW1 on main board
ON
1 2 3 4 5 6 7 8
The table for the camera ID setting
ID SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
0 OFF OFF OFF OFF OFF OFF OFF OFF
1 ON OFF OFF OFF OFF OFF OFF OFF
2 OFF ON OFF OFF OFF OFF OFF OFF
3 ON ON OFF OFF OFF OFF OFF OFF
4 OFF OFF ON OFF OFF OFF OFF OFF
5 ON OFF ON OFF OFF OFF OFF OFF
6 OFF ON ON OFF OFF OFF OFF OFF
7 ON ON ON OFF OFF OFF OFF OFF
8 OFF OFF OFF ON OFF OFF OFF OFF
9 ON OFF OFF ON OFF OFF OFF OFF
10 OFF ON OFF ON OFF OFF OFF OFF
11 ON ON OFF ON OFF OFF OFF OFF
12 OFF OFF ON ON OFF OFF OFF OFF
13 ON OFF ON ON OFF OFF OFF OFF
14 OFF ON ON ON OFF OFF OFF OFF
15 ON ON ON ON OFF OFF OFF OFF
16 OFF OFF OFF OFF ON OFF OFF OFF
17 ON OFF OFF OFF ON OFF OFF OFF
18 OFF ON OFF OFF ON OFF OFF OFF
19 ON ON OFF OFF ON OFF OFF OFF
20 OFF OFF ON OFF ON OFF OFF OFF
21 ON OFF ON OFF ON OFF OFF OFF
22 OFF ON ON OFF ON OFF OFF OFF
23 ON ON ON OFF ON OFF OFF OFF
24 OFF OFF OFF ON ON OFF OFF OFF