9
a
b c d e
f
COMMUNICATION
a
Lens mount cap
The lens mount of the camera is covered using a cap
to protect it. Remove the lens cap covering the lens.
b
Camera installation bracket
The bracket can be fixed at the top or bottom of the
camera.
c
Flange-back adjustment lever
d
Lens iris output connector (LENS)
This - pin connector is used to send the Iris control
signal and power supply to an auto-iris type lens.
e
Setup menu control buttons
Use these buttons to set the menu options.
f
ALC Lens Setting Switch
DC: When you attach an Auto Iris lens requiring
the DC control signal, please put this switch in
the DC position.
ELC: When you attach a manual or fixed lens,
please put this switch in the ELC position.
VIDEO: When you attach an Auto Iris lens requir-
ing the video control signal, please put this
switch in the VIDEO position.
•
•
•
Part Names and Functions
Summary of Contents for LSX701
Page 42: ...P NO MFL62723706 ...