LG LS-C126UMM1 Owner'S Manual Download Page 4

Page: 4 / 31

Room Air Conditioner

Safety Precautions

Be cautious when
unpacking and installing
the product.

• Sharp edges could cause injury.

Be especially careful of the
case edges and the fins on the
condenser and evaporator.

For installation, always
contact the dealer or an
Authorized Service Center.

• There is risk of fire, electric

shock, explosion, or injury.

Do not install the product
on a defective installation
stand.

• It may cause injury, accident, or

damage to the product.

Be sure the installation area
does not deteriorate with
age.

• If the base collapses, the air

conditioner could fall with it, causing
property damage, product failure,
and personal injury.

Do not let the air conditioner
run for a long time when the
humidity is very high and a
door or a window is left open.

• Moisture may condense and

wet or damage furnishings.

Take care to ensure that
power cords could not be
pulled out or damaged
during operation.

• There is risk of fire or electrical

shock.

Do not place anything on
the power cord.

• There is risk of fire or electric

shock.

Do not turn the
air-conditioner ON or OFF
by plugging or unplugging
the power plug.

• There is risk of fire or electrical

shock.

■

Operation

Summary of Contents for LS-C126UMM1
































Search results

Summary of Contents for LS-C126UMM1

Reviews:

Related manuals for LS-C126UMM1

Brands by name

Popular brands

LG LS-C126UMM1, Owner'S Manual

Search results

Summary of Contents for LS-C126UMM1

Reviews:

Related manuals for LS-C126UMM1

Brands by name

Popular brands