LG LS-C126UMM1 Owner'S Manual Download Page 27

Page: 27 / 31

Owner's Manual

ENGLISH

Front panel

Panel hook

Air filters

Gasoline

Powder

Maintenance and Service

Maintenance and Service

Indoor Unit

WARNING: Turn the system off before cleaning.
To clean, wipe with a soft, dry cloth. Do not use bleach or abrasives.

Supply power must be disconnected before cleaning the indoor unit.

NOTICE

1. Open the upside of Front Panel

2. Put up the Front panel.

The hook of panel comes off.

3. Come down the panel and then remove the air filter.

WARNING: Don’t touch the PLASMA Filter
within 10 seconds after opening the inlet
grille, it may cause electric shock.

4. Clean it wi a soft brush and the vacuum cleaner.

If it is very dirty, wash it with water.

5. Reinstall the air filter dried at the shade and then close

the panel.

❏

Never use any of the followings:

•

Water hotter than 40°C
Could cause deformation and/or discoloration.

•

Volatile substances
Could damage the surfaces of the air conditioner.

Summary of Contents for LS-C126UMM1
































Search results

Summary of Contents for LS-C126UMM1

Reviews:

Related manuals for LS-C126UMM1

Brands by name

Popular brands

LG LS-C126UMM1, Owner'S Manual

Search results

Summary of Contents for LS-C126UMM1

Reviews:

Related manuals for LS-C126UMM1

Brands by name

Popular brands