Owner's Manual
25
ENGLISH
AUTO CLEAN
Operating Instructions
❏
During Auto Clean function, moistures left in indoor units after Cooling Operation or Healthy
Dehumidification Operation can be removed.
❏
During Auto Clean function, only Start/Stop button, Plasma button and Auto Clean button are available.
NOTICE
Auto clean (Optional)
1. Whenever you press the Auto Clean button, Auto Clean Function will be
reserved and cancelled.
2. Auto Clean function works before and after cooling or dehumidification mode.
For details, refer to the below points.
3. When the unit is started after the reservation of Auto Clean ,the Cool Start
function operates and indoor Fan is started after 20 seconds.
4. When you press Start/Stop button to turn off the unit after the you have reserved
Auto Clean function, the air-conditioner circulates the indoor air in the Auto
Clean mode with no more Cooling or Dehumidification operation. For Cooling
only model, it lasts for 30 minutes for Heat pump model, for 16 minutes.
5. If you press the auto clean button again during the product operation , Auto
Clean function will be cancelled.
Display Luminosity (Optional)
• The Display Luminosity can be adjusted by using the remote control.
Press the start/stop button to start the unit. Open the door on the remote control, press the 2ndF button
and, press display luminosity button. Display will be dark. Press the button again to set bright display.
Summary of Contents for LS-C126UMM1
Page 31: ......
