LG LRMDC2306 Series, Service Manual

Page: 121 / 134

-1 19 -
Copyright © 2019 LG Electronics Inc. All rights
reserved. Only training and service purposes.
f
Lock
The lock function disables every other button on the display.
• When power is initially connected to the refrigerator, the lock function is off.
• To lock the control panel buttons, press and hold the
Lock button until the
k
icon appears in the
display and the function is activated.
• To disable the function, press and hold the Lock button for approximately three seconds.
g
Water Filter
Replace the water filter when the
h
icon turns on. After replacing the water filter, press and hold the
Water Filter button for three seconds to turn the icon light off. Replace the water filter approximately
every six months.
h
Wi-Fi
The Wi-Fi button, when used with the LG ThinQ app, allows the refrigerator to connect to a home Wi-Fi
network. Refer to Smart Functions for information on the initial setup of the application.
The
f icon shows the status of the refrigerator's network connection. The icon illuminates when the
refrigerator is connected to the Wi-Fi network.
Press and hold the
Wi-Fi button for 3 seconds to connect to the network. The icon blinks while the
connection is being made, then turns on once the connection is successfully made.
i
Measured Fill
The measured fill function dispenses premeasured amounts of water automatically.
j
Water & Ice Type
Select the desired dispenser mode from the buttons on the dispenser control panel. Press the
dispenser switch with a glass or other container to dispense cubed ice, water or crushed ice.
Changing the Craft Ice Mode
NOTE
• This feature is only available on some models.
• The
Freezer button can also be used to set the Craft Ice mode to either 3 ICE or 6 ICE . The default mode
is 3 ICE .
1
Touch any button on the control panel to activate it.
2
Press and hold the Freezer button for 3 seconds until the control panel beeps and the current ice
mode appears.
3
Press the Freezer button repeatedly to toggle between the 3 ICE and 6 ICE modes. After 5 seconds of
idle time, the last mode set will be saved, and the display will return to normal.
NOTE
• For more ice, select the 6 ICE mode. For clearer ice, select the 3 ICE mode.