LG LRA3040N-NH, Owner'S Manual

Page: 35 / 47

Installation 35
3
Install
ation
DST
• DST: Select [Enable] or [Disable].
• Time Offset: Set the Time Offset.
• Daylight Saving Time: Set a start and end time of Daylight Saving
Time.
Save: Click [Save] button to confirm the settings.
NTP
• NTP: Select [Enable] or [Disable].
Select it when using a NTP (Network Time Protocol) server to set
the time.
• Server Address: Select a Server Address.
• Time Zone: Select your time zone and select the [Update Now]
button to set the time of the system.
Save: Click [Save] button to confirm the settings.
Note
If you don't apply NTP function to this system, it may cause a time
error. We recommend using the NTP function.
NTP server list : time.windows.com, time.nist.gov, pool.ntp.org
Users
• No.: Displays the number of HDD connected to system.
• User Name / Level / Enable: You can set one administrator and six
users.
1. Select the desired administrator or user to set and then press
the [Edit] button.
The editing screen appears.
- User Name: The name is defined in the system. It is not
possible to change.
- User Enable: Select [Enable] or [Disable].
- User Name: Set the desired User Name.
- Password Enable: Select [Enable] or [Disable].
- Password: Select a desired password.
- Confirm: Enter a password again.
2. Click [Save] button to confirm the settings.
Note
• If you select the [Format] button will reset all settings.
When you press [Cancel] to cancel all the editing and
working windows disappers.
• The user name and password the uppercase and
lowercase letters.
• User Password should be at least six characters.