LG LRA3040N-NH, Owner'S Manual

Page: 12 / 47

12 Installation
3
Install
ation
Connecting Network
You can control and monitor the system via network. With the remote
control (monitoring), you can change the system configuration or
monitor the image via network. After the installation, check the
network settings for the remote control and monitoring work.
Network connection
CH5 CH3 CH1
CH1
CH2 CH4
CH3
CH6 CH4 CH2
DC 12 V
RS485
LAN
VGA
HDMI
AUDIO
OUTPUT
5 V
USB
0.5 A
AUDIO
INPUT
Broadband Service
Router
LAN connection
Connect the LAN port to an available 10/100 base-T port with a
straight ethernet cable (not supplied). The NET indicator on the front
panel will be lit.
Automatic network configuration
The DVR can automatically obtain and configure the network interface
via DHCP.
Manually configure network
The DVR may be manually configured by assigning an IP address,
subnet mask, gateway and DNS.
NOTE
It does not support IPv6 network service.
Connecting USB device
Connecting USB device (Front)
Connecting USB device (Rear)
CH1
CH1
CH2 CH4
CH3
CH2
DC 12 V
RS485
LAN
VGA
HDMI
AUDIO
OUTPUT
5 V
USB
0.5 A
AUDIO
INPUT
USB Memory device
Insert the memory device into the USB port. The system automatically
recognizes the device. The system software can be easily upgraded
using a USB memory device.
Automatic network configuration
Connect the external device to the USB port.
(Example: External HDD or other external storage.)
Manually configure network
Connect the USB mouse to operate the functions of the DVR.