LG LGLX400, User Manual

Page: 60 / 180

Making a TeamDC Call
1.
Press Contacts (right softkey).
– or –
Press
> History .
2. Select a TeamDC group and press the Direct
Connect button.
3.
Continue the TeamDC call as any other Direct
Connect or Group Connect call.
4.
When you are finished, press to end the call.
(When you end a TeamDC call that you initiated, all
other participants are dropped from the call.)
Joining orRejoining a TeamDC Call
If you are not available at the beginning of a call, or if
you drop off the call temporarily, you can rejoin the
in-progress TeamDC call.
1.
Press > History .
2. Select the TeamDC entry and press the Direct
Connect button.
3.
Continue the TeamDC call as described previously.
Note If the Team DC call has already ended, pressing the
Direct Connect button initiates a new Team DC call.
Tip You may also join or rejoin a Team DC call from your
Contacts. Select the Team DC group and press the
Direct Connect button.
Note Group Termination Options By default, when the
originator of a Group Connect orTeamDC call ends
the call, all other participants are disconnected as
well. When available, you will be able to select a
setting in
Settings > Direct Connect > Group Call
Options
to allow Group Connect and Team DC calls
you initiate to remain active after you leave the call.
46 Section 2B. Nextel Direct Connect
LX400_Eng_0603.qxp 6/3/09 10:51 AM Page 46