LG LD-2273THB Owner'S Manual Download

Page: 23 / 24

ROUBLE SHOOTING GUIDE

Problem

The display shows "

code. (Water is not
pumped away.)

• Straighten hose(s).
• Clean the filter.
• If you can not solve

the problem, call for
service.

• The drain hose is kinked.
• The filter is clogged.
• Motor trouble.

(Washing motor or Drain motor)

The display shows "

code.

• Check the water tap.
• If you can not solve

the problem, call for
service.

• Water is not supplied.
• Water tap is not opened.
• Water sensor has a trouble.

The display shows "

code.
(Automatically Drain
pump operated.)

• Close the water tap

and unplug the power
plug.

• Call for service.

• Water is leaking from the hose

connections.

• Damage to the unit has been

caused by a water leak.

The display shows "

code. (Automatically
Drain pump operated.)

• Excessive water is supplied than

the normal water level.

• There is a problem with the inlet

valve.

The display shows "

code.

• The water heater circuit is damaged.

The display shows "

code.

The display shows "

code.

The display shows "

code.

• Thermistor trouble or very high inlet

water temperature.

• Motor trouble.

Solution

Possible Causes

MFL30149726

2008.3.19

4:57

페이지23

001

GateRip_A4

Summary of Contents for LD-2273THB

























Search results

Summary of Contents for LD-2273THB

Reviews:

Related manuals for LD-2273THB

Brands by name

Popular brands

LG LD-2273THB, Owner'S Manual

Search results

Summary of Contents for LD-2273THB

Reviews:

Related manuals for LD-2273THB

Brands by name

Popular brands