SER MAINTENANCE INSTRUCTIONS
U
21
To prevent trouble and poor operating, it is important to check filters and spray
arms at regular intervals.
Filters
• Remove the lower rack first.
• Turn the mesh filter counterclockwise.
• Take out the mesh filter, upper STS filter
and outer filter.
• Clean them if necessary.
• Replace them in the reverse order.
upper STS filter
outer filter
mesh filter
Upper Spray Arm
• Pull the upper rack forwards.
• Check that the water jet holes are not
blocked.
• If cleaning is required, remove the arm by
unscrewing the nut.
• Clean the spray arm and replace it in the
reverse order.
Lower Spray Arm
• Check that the water jet holes are not
blocked.
• If cleaning is required, remove the arm by
pulling up.
• Clean the spray arm and replace it pulling
down.
■
After each cycle, clean the filter for
the better washing result.
■
Before starting, check that the filter is
assembled well. If the filter is not
assembled correctly, you might have
a poor cleaning result.
Upper
spray arm
MFL30149726
2008.3.19
4:57
PM
페이지21
001
GateRip_A4
