NSTALLATION INSTRUCTIONS
I
6
Step 3 :
PREPARING THE DISHWASHER
FOR INSTALLATION
1
2
Lay the dishwasher on its back.
Adjust the legs to the required height
as shown in below figure.
Step 4 :
INSTALLING THE
DISHWASHER IN CUPBOARD
1
2
Before sliding the dishwasher into the
cupboard opening, all necessary height
and balancing adjustments should be
made using a spanner.
Slide the dishwasher into the cabinet
opening carefully. Make sure that the
drain hose inside the cabinet is not
kinked or stretched.
3
Snap the left(right) rail onto the
left(right) feet of the base. The
adjustment screw should be facing
toward the front.
4
Set the dishwasher upright.
※
Leveling kit is consist of two rails.
The rail A is left rail and the rail B is
right rail. Turn the front adjustment
screw to level the dishwasher.(step8)
LEFT RAIL - A
RIGHT RAIL - B
CAUTION
Adjusting the fully seated rear feet in
the wrong direction, especially with a
power screwdriver, can damage the
adjusting mechanism.
Note
Do not use the leveling kit if the counter
height dimensions are too low. In this
case, the rear feet must be adjusted before
installing the dishwasher into the cabinet.
MFL30149726
2008.3.19
4:57
PM
페이지6
001
GateRip_A4
