EFORE USING FOR THE FIRST TIME
B
12
1. Hardness setting
�
Check the water hardness of your area.
(Your water supplier will be able to tell you this.)
�
Set the water hardness according to the setting method of
the water softener.
Adjust the water softener to the setting to the corresponding hardness of the water in your area.
The water softener has 8 adjustment levels.
The dishwasher is programmed at the factory for a water hardness level of “ ”.
This can be checked and altered by using the buttons on the control panel.
1. First, ensure the dishwasher is switched off.
2. Press
Cool Dry
and
Power
button simultaneously and keep them pressed.
3. To change the setting:
Simply press the
Cool Dry
button, then the figure will change one by one.
The display will change between “ ” and “ ”.
4. Once the hardness setting is correctly adjusted, press the
Spray
button.
The hardness setting is then saved.
�
Setting up the water softening system
Immerse
all reaction zones
of the test strip in
the measurement sample
for approx. 1 sec
(not in running water!)
.
Shake off excess liquid from the strip and
after 1 min
determine with which colour row
on the label the colours of the reaction zones
coincide most exactly.
Read off the corresponding result or, if
necessary, estimate an intermediate value.
Procedure
Hardness range
<Hardness test strip>
°
d
°
e
°
f
mmol/l
(Ca+Mg)
mg/l
Ca
Water
quality
1
°
e = 14.25 mg/l CaCO
3
1
°
f = 10 mg/l CaCO
3
1
°
d = 10 mg/l CaO (=1,78
°
f) (=1,25
°
e)
<7
7 - 14
14 - 21
>21
<9
9 - 17,5
17,5 - 26
>26
<12,5
12,5 - 25
25 - 37
>37
<1,3
1,3 - 2,5
2,5 - 3,8
>3,8
<50
50 - 100
100 - 150
>150
soft
moderately hard
hard
very hard
Ⅰ
Ⅱ
Ⅲ
Ⅳ
TOTAL HARDNESS TEST
MFL30149726
2008.3.19
4:57
PM
페이지12
001
GateRip_A4
