12
INSTALLATION
Installing the appliance
CAUTION
•
Do not use a silicon sealant to seal the
appliance against the aperture.
This will make it difficult to remove the appliance
from the aperture in future, particularly if it
needs to be serviced.
CAUTION
•
In order to prevent tipping of the appliance, the
stabilizing brackets must be installed.
1
Locate the brackets and screws.
•
Remove the brackets and screws from the
package.
2
Install the brackets.
•
Place the brackets at the specified positions
on the side of the product.
•
Tighten the screws through the brackets.
3
Insert gas hob into cutout.
The Correct
location
Gas connection
NOTE
•
This appliance must be installed and connected
in accordance with installation regulations in
force in the country in which the appliance is to
be used.
•
This appliance is supplied to run on LPG and
natural gas. Conversion for use on LPG and
natural gases must only be undertaken by a
qualified person.
•
It is the law that all gas appliances are installed by
competent persons in accordance with the current
edition of the Gas Safety Installation and Use
Regulations.
•
It is in your interest and that of safety to ensure
compliance with the law.
Gas supply replacement and installation
guidelines:
The gas rail
Gasket
G1/2" Elbow
(use 24 mm wrench)
G1/2" Nipple
(use 24 mm wrench)
Gas specification
Model No.
Gas type &
pressure
Electrical
power
Heat input and Nozzle size
marked (mm)
Total heat
input
Wok burner
(Triple)
Rapid Burner
HJ747DAP
LPG
2.9 kPa
230 V, 50 Hz
3.3 kW,
0.93 mm
2.4 kW,
0.79 mm
11.1 kW
Natural Gas
2.1 kPa
3.3 kW.
1.30 mm
2.7 kW,
1.20 mm
11.5 kW
