manualshive.com logo in svg

LG HDR1000, Service Manual, Page: 90 / 126

Share
Download
LG HDR1000 Service Manual Download Page 90

4-20

Copyright © 2008 LG Electronics. Inc. All right reserved.

Only for training and service purposes

LGE Internal Use Only

To make recordings, it is necessary to modulate the write pulse, which is called “Write Strategy”.
There can be many types in Write Strategy. Typically Write Strategy for DVD 

R has NMP(Non Multi-Pulse)

type and MP(Multi-Pulse) type. In NMP type each single mark is created by subsequent separated short
pulses. In MP type each single mark is created by one continuous pulse.
Write Strategy for DVD 

RW has Type 1 and Type 2. In Type 1 the mark with nT width is created by one

top pulse and (n-2) multi-pulses. Thus mark 3T is made by one top pulse and one multi-pulse. In Type 2 the
mark with nT width is created by one top pulse and (n-3) multi-pulses. Thus mark 3T is made by one top
pulse only.
RS-06A uses MP type Write Strategy for DVD 

R and Type 1 for DVD 

RW as shown below.

Summary of Contents for HDR1000































































































































Reviews:

No comments