LG HB-2051BCJ, Instructions Manual

Page: 200 / 218

CLEANING INSTRUCTIONS
EN
200
CLEANING (Always unplug unit)
ANY SERVICING REQUIRING DISASSEMBLY, OTHER THAN THE CLEANING DESCRIBED BELOW, SHOULD BE PERFORMED
BY AN AUTHORIZED SERVICE REPRESENTATIVE.
• Avoid using any cleaning agent other than dish detergent.
• Do not use steel wool or other abrasive materials.
• Do not wash any of the removable parts in the dishwasher.
• Do not immerse the bread pan in water. Wipe clean with a damp cloth, then dry thoroughly.
Otherwise, the kneading process will not operate or noise will be occur during kneading.
• Wipe the shaft with a soft cloth or sponge to prevent damage to the seal packing.
• Allow to dry before storing the pan inside the bread machine.
• It is not necessary to remove the kneading blade for cleaning. But if you wish to, it can be
removed after each use.
• Wipe the exterior with a damp dishcloth after each use. Do not immerse in or splash
with water.
• After using, cool and wipe out the oven interior with a damp dishcloth or plastic
scouring pad.
• To remove the kneading blade, fill the pan with hot soapy water and allow it to
soak for 20 minutes.
Wash it with a soft brush or cloth and dry thoroughly.
• Do not use metal utensils inside the machine.
They will damage the non-stick coating. If the bread sticks to the lid, use a plastic pancake turner to clean.
NOTE : The non-stick coating may change color over time. This is caused by moisture and steam
and in no way affects performance.
STORING
• Be sure bread machine is completely cooled before storing.
• All removable parts should be thoroughly cleaned and dried.
• Store bread machine with lid closed.