manualshive.com logo in svg

LG FH069FD2PS, Owner'S Manual

Share
Download
LG FH069FD2PS Owner'S Manual Download Page 66

66

PROGRAMMING MODE - COLLECT MODE

Data Name

Button

Display

Description

Entering 

the collect 

mode

1.  Entering the 

programming 

mode. 

Insert service car d(card type), turn on/off  toggle 

switch (Coin type).

2. 90°C (194°F) 

Press the 

90°C (194°F)

 button until 

 appears 

in the display.

3.   75°C (167°F)(+), 

60°C (140°F)(-)

Press the 

75°C (167°F)(+), 60°C (140°F)(-)

 button 

until 

 appears in the display.

4. Start

Enter the Collect information data.

5.  75°C (167°F)(+),  

60°C (140°F)(-)

xxxx

Move to each data list that you want to check by 

pressing with 

75°C (167°F) (+)

 or 

60°C (140°F) (-)

 

button.

6. Start

xxxx

Display the value of selected data list

7. 90°C (194°F)

Move to upper level or Comes back to Idle State

PROGRAMMING MODE - 

COLLECT MODE

Collect information data : 

 (display)

The washer collects the usage data so that the owner can check various information like number of 

various cycles used, how many times coins used, etc. 

Entering the collect mode

❖  

Check the collect information reference to the follow lists. The Lists are displayed by abbreviations. 

Summary of Contents for FH069FD2PS













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands