manualshive.com logo in svg

LG FH069FD2PS, Owner'S Manual

Share
Download
LG FH069FD2PS Owner'S Manual Download Page 32

32

PROGRAMMING MODE - SETUP MODE

Entering set up 

mode.

You will see LqC1 

Button

Display

Press the 

90°C (194°F)

 button.

Press the 

75°C (167°F)

 or the 

60°C (140°F)

 button until                   

 appears in the display. 

Press the 

Start

 button.

Press the 

75°C (167°F)

 or the 

60°C (140°F)

 button until                   

 appears in the display. 

Press the 

Start

 button. 

Display previous special hot price.

Press 

75°C (167°F)(+)

 or 

60°C (140°F)(-)

 button to set 

the special hot price. 
(The vend price can be set from 0~10,00 in 0,1 
increments.)

Press the 

Start

 button. 

The machine sets up the special hot price, then 

advances to  the next process automatically.

If this function is restricted originally in program, 

You can move to the next step by pushing the 60°C 

(140°F) button.

1. Continue to set up the next price. 

2.  Stop the change of setup value and go back to ready 

mode. 

• Coin type - Turn on/off toggle switch. 

•  Coin/OPL type - Push the 90°C (194°F) button 

twice.

8. how to change special 75˚C(167˚F)/90˚C(194˚F) price

NOTE

• This function is not applied for opl type.

Summary of Contents for FH069FD2PS













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands