manualshive.com logo in svg

LG FH069FD2PS, Owner'S Manual

Share
Download
LG FH069FD2PS Owner'S Manual Download Page 42

42

PROGRAMMING MODE - SETUP MODE

Entering set up 

mode.

You will see LqC1 

Button

Display

Press the 

90°C (194°F)

 button.

Press the 

75°C (167°F)

 or the 

60°C (140°F)

 button until 

 appears in the display. 

Press the 

Start

 button.

Press the 

75°C (167°F)

 or the 

60°C (140°F)

 button until                   

 appears in the display. 

Press the 

Start

 button. 

Display 

 .

Press the 

Start

 button. 

Press 

75°C (167°F)

 or 

60°C (140°F)

 button and then 

select 

 or 

 .

One or the other 

will display.

Disable

Enable

Press the 

Start

 button. 

The machine sets up the special price day (Sunday), 

then advances to the next process automatically. 

If this function is restricted originally in program, 

You can move to the next step by pushing the 60°C 

(140°F) button.

1. Continue to set up the next mode. 

2.  Stop the change of setup value and go back to ready 

mode. 

• Coin type - Turn on/off toggle switch. 

•  Coin/OPL type - Push the 90°C (194°F) button three 

times.

11-1. how to change to Sunday

NOTE

 •  As explained on the previous page, similarly, other days can be set up by the same method.
 •  This function is not applied for opl type.

Summary of Contents for FH069FD2PS













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands