manualshive.com logo in svg

LG FH069FD2PS, Owner'S Manual

Share
Download
LG FH069FD2PS Owner'S Manual Download Page 22

22

PROGRAMMING MODE

- Coin type -

- Card type -

- OPL type -

how to enter "Programming mode"

You can enter programming mode only for Idle 

state and pause state.

- OPL/Coin/Card Type

1)  Push the 90°C (194°F) & 60°C (140°F) button 

at the same time.

2) Push the 75°C (167°F) button 3 times.

3) Push the Start button.

4) Display will show “             ”.

- Card type

1) Insert service card.

2) Display will show “             ” 

- Coin type

1) Disassemble upper coin box key. 

2) Take out the coin drop from the coin box. 

3)  Turn on/off  the toggle switch at the back of 

the coin box.

4) Display will show “             ”.

how to use button

You can change Washer vend price, cycle time 

and Cycle parameters, etc.

 :  You can check machine information or change setting on  “Program setup”, “Collect Information 

Data”, ”Diagnostic Test”.  

PROGRAMMING MODE

Press Button

Description

90°C (194°F) 

Move to upper level or 

Comes back to Idle State

75°C (167°F)

Move to the mode in the 

same level (+)

60°C (140°F)

Move to the modes in the 

same level (-)

Start

Enter the selected mode 

Coin Box Key

Insert Debit Card 

Coin Vault 

Openings : close

 NOTE

•  If you turn on the power without connecting meter case for the first time, the machine display 

 .

•  When the machine is shipped from the factory, 

it is set in the coin type.

 You can change Card/

Coin type by button. (For more information refer to SETUP mode.)

• The machine will display PUSH for OPL type.

Summary of Contents for FH069FD2PS













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands