LG FH069FD2PS Owner'S Manual Download Page 34

Page: 34 / 76

PROGRAMMING MODE - SETUP MODE

NOTE

• This function is not applied for opl type.

9-1. Special price day setup

Entering set up

mode.

You will see LqC1

Button

Display

Press the

90°C (194°F)

button.

Press the

75°C (167°F)

or the

60°C (140°F)

button until

appears in the display.

Press the

Start

button.

Press the

75°C (167°F)

or the

60°C (140°F)

button until

appears in the display.

Press the

Start

button.

Display

Press the

Start

button.

Press

75°C (167°F)

60°C (140°F)

button and then

select

One or the other will

display.

Disable

Enable

Press the

Start

button.

The machine sets up the special price day, then

advances to the next process automatically.

1. Continue to set up the next mode.

2. Stop the change of setup value and go back to ready

mode.

• Coin type - Turn on/off toggle switch.

• Coin/OPL type - Push the 90°C (194°F) button three

times.

Summary of Contents for FH069FD2PS













































































Search results

Summary of Contents for FH069FD2PS

Reviews:

Brands by name

Popular brands

LG FH069FD2PS, Owner'S Manual

Search results

Summary of Contents for FH069FD2PS

Reviews:

Brands by name

Popular brands