Getting Started
6
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
CAUTION
Indicates a situation where damage or injury
may occur. If it is not avoided, minor injury and/
or damage to property may result.
y
Before testing electrical parts inside the system, there is a minimum of a 10 minute
standby period to completely discharge the system.
y
Do not use any damaged, cracked, or frayed electrical cables or connectors. Protect
the electrical cables from physical or mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or stepped on. Periodically examine the electrical cables of
your product. If the appearance indicates damage or deterioration, discontinue use of
this product and have the cables replaced with an exact replacement part by a qualified
personnel.
y
Ensure that you connect the earth ground wire to prevent possible electric shock. Do not
try to ground the product by connecting it to telephone wires, lightning rods, or gas pipes.
y
Do not put the product or components in water or liquid.
y
Make sure that there are no water sources, such as faucets or sprinklers, near the
installation site.
y
Do not block any ventilation openings. Ensure reliable operation of the product and
protect it from overheating. Do not block any openings by placing objects on this product.
y
The metal enclosure may heat to a high temperature during operation.
y
The product must be disposed of according to local regulations.
y
If the ESS is not operated for a long time, the battery may be overdischarged.
y
Do not step on the product or the product package. The product may be damaged.
y
Batteries may present a risk of electrical shock and high short-circuit current. The
following precautions should be observed when working on the ESS system include:
a) Remove watches, rings, and other metal objects.
b) Use tools with insulated handles.
c) Wear rubber gloves, boots, and glasses.
d) Do not lay tools or metal parts on top of the system.
y
In the event of fault, the system must not be restarted. Product maintenance and repairs
must be performed by trained service providers.
y
If a system fault occurs immediately after starting the system, check the error code on
the Smart Energy Box (SE Box) display and follow the solution described in the manual.
