Connection of external equipment
Digital satellite dish socket (DISH INPUT)
The digital satellite dish socket allows you to connect a digital
satellite dish(not supply) to the set.
Satellite out socket (SKY OUT)
Your set can be connected to other equipment such as your VCR,
and a satellite programme can be recorded whilst viewing terrestrial
channel.
Telephone line socket (TELEPHONE LINE INPUT)
With the exceptions of the mains and telephone line, all the
interconnections between the rear panel of your set and equipment
connected to it are safe, extra-low voltage circuits.
The telephone lead is intended for connection to a standard U.K.
telephone line. This lead and your set have been specifically
approved for this purpose.
After the telephone lead has been connected into the rear panel, you
cannot remove it. If you need to move your set, you must first remove
the mains lead, then unplug the telephone lead at its wall socket.
You may need to purchase a telephone socket doubler to allow the
telephone lead and your normal telephone to be connected at the
same time. Satellite receiver REN Value 0.5.
RS-232
The RS-232 socket is for future use. If you connect earthed
equipment to this socket you must used an approved screened
cable.
WARNING :
You must disconnect your set from the mains supply before
you connect your set to(or disconnect it from) any other
equipment.
Audio out sockets (AUDIO OUT)
The phono sockets for a Hi-Fi amplifier system are on the back of
the set; L=left sound channel, R=right sound channel.
If you connect an amplifier system, you can also play the TV sound
through the stereo amplifier system. If you press the MUTE button,
only the sound of the TV's speakers are switched off.
24
L
R
AUDIO OUT
RS-232
DIGITAL INTERFACE
5V DC 600mA max.
3V3 DC 1.2A max.
1
VCR
SKY OUT
75
Ω
LL
DISH INPUT
TELEPHONE INPUT
LINE
13/18V DC
350mmA max.
L
R
AUDIO OUT
1
SKY OUT
75
Ω
LL
Amplifier
