For more information on the microSD, please refer
to the memory card instruction manual.
Memory card formatting
Before you start to use the memory card you have
to format it. After you insert the memory card,
select
Menu
>
Settings
>
Phone settings
>
Memory status
>
Format external memory
, then
press
. This operation should only be done
when you insert the memory card for the first time.
During formatting various folders will be created for
different data types.
Turning the handset on/off
Turning your handset on
Ensure that your USIM card is in your handset and
the battery is charged. Press and hold
until the
power comes on. Enter the USIM PIN code that was
supplied with your USIM card if the
PIN code
request
is set to
On
. (Note: Please refer to page 64)
After a few seconds you will be registered on the
network.
Turning your handset off
Press and hold
until the power goes off. There
may be a few seconds delay while the handset
powers down.
Do not turn the handset on again during this time.
Access codes
You can use the access codes described in this
section to avoid unauthorised use of your phone.
The access codes (except the PUK and PUK2
codes) can be changed by using the
Change codes
feature [Menu #.1.4.3].
PIN code (4 to 8 digits)
The PIN (Personal Identification Number) code
protects your USIM card against unauthorised use.
The PIN code is usually supplied with the USIM
card. When the
PIN code request
is set to
On
,
your phone will request the PIN code every time it
is switched on. When the
PIN code request
is set
to
Off
, your phone connects to the network
directly without the PIN code.
PIN2 code (4 to 8 digits)
The PIN2 code, supplied with some USIM cards, is
required to access functions such as
Fixed dial
number
. These functions are only available if
supported by your USIM card.
PUK code (4 to 8 digits)
The PUK (PIN Unblocking Key) code is required to
AM
11:30
Getting Started
20
Ge
tting St
ar
te
d
Summary of Contents for Chocolate KU800
Page 336: ......
