25
206-4157
PCS150R Configuration Options (Cont.)
(Continued from previous page)
4. The system displays the following prompt for a location, followed by a list of options:
Please identify a location so that time zone rules can be set correctly.
Please select a continent or ocean.
At the
#?
prompt, type the number that corresponds to the appropriate option for your
location, and then press
Enter
.
5. The system displays the following prompt for a country, followed by a list of options:
Please select a country.
At the
#?
prompt, type the number that corresponds to the appropriate option for your
country, and then press
Enter
.
6. The system displays the following prompt for a region, followed by a list of options:
Please select one of the following time zone regions.
At the
#?
prompt, type the number that corresponds to the appropriate option for your
region, and then press
Enter
.
After you specify the time zone region, the system displays an overview of your location
selections and prompts for confirmation, for example:
The following information has been given:
United States
Central Time
Therefore TZ=’America/Chicago’ will be used.
Local time is now: Wed Mar 6 16:23:10 CST 2013.
Universal Time is now: Wed Mar 6 22:23:10 UTC 2013.
Is the above information OK?
1) Yes
2) No
#?
7. Either:
• Type
1
and press
Enter
if the information in the display is correct. The system will confirm
the setting and then prompt you to reset the PCS150R:
Time zone has been set. Please reset the board.
Continue with step 8.
• Type
2
and press
Enter
to return to the initial location prompt and reset the time zone
(repeat this procedure from step 4).
8. If you are ready to reset the PCS150R immediately, at the
Command >
prompt, type
reset
and press
Enter
(see “Reset the PCS150R” on page 29 for further information).
Note:
If you intend to modify additional configuration settings during the current session,
you may wait until all changes are complete before you reset the PCS150R.
