29
206-4157
Update the VPN Setup
This option enables you to update the VPN client via a serial link to the PCS150R. The
appropriate update file must be provided by LG; the system will not transfer an improper file.
1. Log in to the PCS150R as described on page 19.
2. At the
Command >
prompt, type
vpn
and press
Enter
.
3. At the
Send VPN client file using Xmodem ...
prompt, transfer the new VPN
client file using Xmodem protocol. For example, in HyperTerminal, select
Transfer
and then
Send File...
. In the Send File window, enter or select the appropriate filename in the File-
name field, and select
Xmodem
in the Protocol field.
The system will display progress messages as well as the result of the update process
(which may take several minutes).
4. When the update is successfully completed, you may be prompted you to reset the PCS150R.
If necessary, reset the server (see “Reset the PCS150R” below).
Reset the PCS150R
1. If not already logged in, log in to the PCS150R as described on page 19.
2. At the
Command >
prompt, type
reset
and press
Enter
.
The reset will be initiated immediately. After reset, the PCS150R resumes normal operation.
Exit the Current Session
At the
Command >
prompt, type
exit
and press
Enter
to end the current session.
PCS150R Configuration Options (Cont.)
