22
206-4157
PCS150R Configuration Options (Cont.)
Configure Network Settings
This option enables you to configure the network settings of the PCS150R Ethernet ports.
ETHERNET-0 (eth0) is used for remote communication purposes, while ETHERNET-1 (eth1)
is designated for PCS150R IP output.
1. Log in to the PCS150R as described on page 19.
2. At the
Command >
prompt, type
setip
and press
Enter
.
The system displays an overview of the current network configuration followed by the
Network Configuration Menu, for example:
Current Network Configuration
Interface eth0
Host name:
pcs150r
Using DHCP:
YES
Interface eth1
Host name:
pcs150r
Using DHCP:
YES
DNS servers
Primary DNS:
68.94.156.1
Secondary DNS:
68.94.157.1
--------------------------
Network Configuration Menu
--------------------------
eth0 Configure eth0
eth1 Configure eth1
dns Configure dns
exit Exit network configuration
Choose item to modify >
3. Either:
• Continue with step 4 for information on modifying the configuration a PCS150R Ethernet
port.
• Go to step 9 for information on modifying the DNS configuration.
• To exit the Network Configuration Menu without modifying any settings, type
exit
at the
Network Configuration Menu
>
prompt.
4. Type
eth0
or
eth1
, as applicable, and press
Enter
to modify the configuration of the
ETHERNET-0 or ETHERNET-1 port, respectively.
(Continued on next page)
