LG BR625T, Owner'S Manual

Page: 19 / 88

19 Basic Setup
Basic Setup
3
C: Proxy Setting
Proxy settings will be needed when this unit is connected
to a broadband Internet connection and your ISP requires
proxy settings.
If you are not required to configure proxy setting, proceed to
(D).
1. Enter the Proxy Address and the proxy port.
1) Use [ / ] to select “Proxy Setting”, then press
[ ENTER] .
2) Select “Use”, then press [ ENTER] .
-
Entry screen will appear.
3) Use [number buttons] to enter the proxy address
provided by your ISP, then press [ ENTER] .
-
The port number entry screen will appear.
4) Use [number buttons] to enter the port number,
then press [ ENTER] . The highlight will
automatically move on “OK”, then press [ ENTER] .
D: Connection Speed
“Auto” is recommended in most cases. If a connection test
fails after IP Address setting and DNS-IP setting, then try
following.
1. Configure the connection speed.
1) Use [ / ] to select “Connection Speed”, then
press [ ENTER] .
-
Available speeds will be displayed.
2) Select the desired speed according to your network
environment, then press [ ENTER] .
2. After having configured all the network
settings, select “OK” in the sub menu using
[ ] , then press [ ENTER] .
3. Press [ BACK] repeatedly to exit.
E: Connection Test
1. Perform a connection test.
1) Use [ / ] to select “Connection Test”, then
press [ ENTER] .
-
A connection test will start.
-
If the test is successful, a confirmation message
will appear. Press
[ ENTER] .
-
If the test fails, an error message will appear.
Please follow the instructions and configure
necessary settings.
2. After having configured all the network
settings, select “OK” in the sub menu using
[ ] , then press [ ENTER] .
3. Press [ BACK] repeatedly to exit.
Note
• Depending on the networking device, it may lose its
connection to the network after changing the connection
speed.
Receiving the Programme
Guide
The programme guide, also known as EPG (Electronic
Programme Guide), gives you a list of the DTV programmes
and detailed information about programmes.
By selecting a programme in the programme guide, you can
view the programme or set a timer recording.
Guide to the “Programme Guide” screen
To call up the “Programme Guide” screen, press [GUIDE] in
DTV viewing mode.
24Hrs Timer Daily
R G INFO R R R
Weekly
G G G G G
Info
INFO INFO NFO INFO
E t t i Entertain Entertain t ment ment Entertainment
19:20 THU 02/08/2012
Programme Guide
Weekly Mode
19:30–20:30
THU 02/08
Station A Programme A
Programme D
Programme F
Programme I
Prog...
Programme E Station B
Station C
Station D
Station E
Station F
Station G
19:00 19:30 20:00 20:30
Programme BBB
Programme B Programme C
Programme H
Programme J
Programme L
Programme M
Programme K
1
4
2
5
7
9
1
3
4
6
10
2
5
7
9 8
1. Mode: Weekly / Daily
2. Current time, day, date / month / year
3. Start time - End time of the selected programme
4. Programme
name
5. Genre / Rating
6. Day, date / month of the programme list
7. Time-shift for 2 hours
8. Channel list (Referring to the channel map)
9. Programme
list
10. Operation guide: [RED] / [GREEN] / [ ENTER] /
[ / ] / [INFO]
Ƈ
About programme guide
Programme guide will be available after receiving the EPG
data.
• The EPG data will be received after completing
“Installation” in “DTV Menu”.
Note
• In the following cases, an EPG data reception will not
complete and blank cells will be shown or the old data
will remain.
-
In the case of power outage or the AC cord is
unplugged
-
Under poor reception conditions
• In the following case, the programme guide will not be
available until next EPG data reception.
-
When retuning channels
• When a broadcast station airs a different programme
from the scheduled programme. This may cause an
inconsistency between the actual air and the information
in the programme guide.
EAB31̲30AD.indb 19 2012/08/28 10:12:51