ʅ
ʅ
ʅ
ʅ
aria
130 - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
3
Fixed Feature Buttons
FLASH
button may be used to terminate an outside call and
re-seize dial tone without having to hang up the handset.
SPEED
button provides you with access to speed dialing,
save number redial and last number redial.
TRANS
(TRANSFER) button is used to transfer an outside call
from a station to another.
CALLBK
(CALLBACK) button allows you to leave a callback
indication at a station that is busy, unattended, or in DND.
CONF
button is used to establish conference calls.
DND/FWD
(Do Not Disturb/Forward) button allows you to
forward your calls to another destination, or make DND mode.
Quick Reference Guide for
aria 130
Digital Key Telephone
MUTE
button allows you to switch the built in microphone
on or off when using the speakerphone or the handset
microphone when using the handset.
MON
button enables you to make a phone call with-out
lifting handset. It turns the telephone on and off when using
the speakerphone.
HOLD
button enables you to place an outside caller on hold.
REDIAL
allows you to make last number redial and auto
call number redial.
VOLUME
bar allows you to adjust speakerphone and
handset volume.
Call Forward
Press
MON
button.
Press
DND/FWD
button and dial the desired Call
Forward type.
- 0 : Follow me
- 1 : Unconditional
- 2 : Busy calls
- 3 : No answer calls
- 4 : Busy/no answer calls
- 5 : Station off-net, unconditional
- 6 : Station off-net, no answer
- 7 : Incoming outside line to off-net (Sys. ATD only))
- # : Cancel previous call forward
Dial the station number or press DSS button or
intercom group where calls are forwarded.
(Confirmation tone is heard.)
To make Call forward to VMIB, press
#
key after
dialing call forward type (
1~4
).
Call Wait (Camp-on)
If you dial a busy station, you may alert it to your call.
After receiving intercom busy tone, dial
✱
or the last
digit of called station number or press DSS button.
When the called party answers, consult with them
or hang up to transfer the call, if any.
Conference
Call the desired party (internal or outside). When
called party answers, press
CONF
button.
Add next conference party by selecting another
outside line or intercom station.
When the party answers, press
CONF
button twice.
All parties are connected.
To terminate a conference,
The conference initiator should be actively in the
conference.
Hang up, or press
CONF
button to finish the
conference (only for conference initiator).
Leaving a Message Waiting Indication
If you dial a station that is unattended or in Do
Not Disturb, you can leave a message waiting
indication.
Dial the desired intercom station. Busy tone or
DND tone is heard.
Press
CALLBK
button. The called party’s CALLBK
button LED will flash.
To answer a Message Waiting Indication,
Press flashing
CALLBK
button and the station that
left message will be signaled with tone ringing.
If called station does not answer, press the
CALLBK
button once to leave a message.
Placing an Outside Call on Hold
While connected to an outside line,
Press
HOLD/SAVE
button.
- Once for system hold
- Twice for exclusive hold
Reverse if hold preference is programmed to
system hold.
Press
HOLD/SAVE
button.
Last Number Redial
The last dialed number on an outside line is saved.
Press
REDIAL
button. Or,
Press
SPEED
button and dial
✱
.
Each station with LCD has 10 last dialed number
directory. You may find a dialed number by pressing
VOLUME
key. And press HOLD/SAVE button to dial
the number.
Save Number Redial
If you wish to save a number you dialed,
After dialing the number of an outside party, keep
the handset off-hook.
Press
SPEED
button twice.
To dial a saved number,
Press
SPEED
button and dial
#
.
Call Transfer
While connected to an outside call,
Press
TRANS/PGM
button.
Dial station number or DSS button.
(You can select a screened or unscreened transfer.)
Screened Transfer
When that extension answers, announce the transfer
and hang up to complete call transfer.
Unscreened Transfer
When the called extension begins to signal, hang up
to complete call transfer.
Storing Speed Dial Numbers
Press
TRANS/PGM
button and then
SPEED
button.
Dial the speed number bin.
- Station Speed Number bins are
000~099
- System Speed Number bin are
2000~3499
Dial the phone numbers to be stored.
Press
HOLD/SAVE
button to save the number.
