LG aria 130 User Manual Download Page 28

Page: 28 / 46

aria

130 - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE

ttendant

Operat

ion

Button

Procedure

To change the date format on the LCD,

Press

TRANS/PGM

button.

Dial

0 4 4

The format toggles between DDMMYY and MMDDYY. (YY : year, MM : month, DD : date)

Changing Time/Date Format

To change the time format on the LCD,

Press

TRANS/PGM

button.

Dial

0 4 5

The format toggles between 12-hour mode and 24-hour mode. (YY : year, MM : month, DD : date)

Button

Procedure

To store system speed numbers,

Press

TRANS/PGM

button.

Dial

SPEED

button.

Dial speed number bin.

Dial the phone numbers to be stored.

Dial

HOLD/SAVE

button.

Enter Speed Dial NAME (to 16 characters).

HOLD/SAVE

Or,

Press

TRANS/PGM

button.

Dial

SPEED

button.

Dial speed number bin.

Press desired outside line button.

Dial the phone numbers to be stored.

Dial

HOLD/SAVE

button.

Enter Speed Dial Name (to 16 characters).

HOLD/SAVE

To use system speed numbers,

Press

SPEED

button.

Dial speed number bin.

To edit a speed dial Name,

Press the MUTE key to edit the Name without changing the stored number.

A group of speed dial numbers can be stored within the system for access by allowed stations. These numbers provide
speedy access to often used outgoing CO dialing numbers.

System Speed

Dial Range:

2000~3499

System Speed Dial

Range

Attendant Intrusion

Button

Procedure

To assign a flexible key as the Intrusion button

Press

TRANS/PGM

button.

Press the desired flexible key to be registered.

Press

TRANS/PGM

button.

Dial

8 6

Press

HOLD/SAVE

button.

To activate attendant intrusion

Press DSS button corresponding to the busy station you wish to call. (Busy tone is heard.)

Press ATD INTRUSION button. (Intrusion warning tone is heard in the busy station, then a 3-way

conference is set up.)

Attendant may intrude into any station which is in conversation with a CO line.

CO Outgoing Disable

Button

Procedure

To disable outgoing calls a CO line,

Press

TRANS/PGM

button.

Dial

0 7 3

Press the desired outside line button. (Confirmation tone is heard.)

After hearing confirmation tone, selected outside line button is disabled.

Repeat the process to enable the CO line.

Summary of Contents for aria 130















































Search results

Summary of Contents for aria 130

Reviews:

Related manuals for aria 130

Brands by name

Popular brands

LG aria 130, User Manual

Search results

Summary of Contents for aria 130

Reviews:

Related manuals for aria 130

Brands by name

Popular brands