ʅ
ʅ
ʅ
ʅ
aria
130 - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
22
CO Message Wait (CLI Message Wait)
Button
Procedures
Range
When a call is received with DISA/DID, the Calling Line Identification (CLI) of the incoming call is displayed on the LCD of
the station. If the DISA/DID external party hangs up the call before being answered, the CLI will be stored in the CO
message wait queue in the called party.
To retrieve CLI Message,
Press
CALLBK
button.
The stored message will be shown on the LCD.
To delete the current CLI message and see the next one,
Press
CONF
button.
To make a callback,
Press
HOLD/SAVE
button.
The stored number is dialed as speed dialing.
To see the next/previous CLI message,
Press
VOLUME
button.
To delete all CLI messages,
Press
SPEED
button twice.
If DVU message is stored with CLI message, the CLI message will not be deleted by
pressing SPEED button.
DISA (Direct Inward System Access)
Dial the CO access code after hearing dial tone or voice guide from DVU.
Or, dial the CO access code after dialing the programmed authorization code (when
needed) for outgoing call.
Button
Procedures
Outside caller can access a CO line which is programmed as DISA line.
Range
LCD Language Change
Button
Procedures
Range
Press
TRANS/PGM
button and dial
7 1
The language in LCD is changed into default value.
If pressing TRANS/PGM +
7 1
, the language in the LCD is changed to the nation’s
language.
System Features
Button
Procedures
Alarm Reset
Range
To terminate alarm signal while idle state,
Dial
✳
5 6 5
Confirmation tone is heard and the alarm signal is terminated
at all assigned stations.
Two-way Recording
To record the conversation,
Press the programmed {RECORD} button.( To program the {RECORD} button,
[TRANS/PGM] + Flex. BTN + [TRANS/PGM] +
5 4
+ [HOLD/SAVE] )
To finish the recording,
Press the programmed {RECORD} button again. Or, replace the handset.
Button
Procedures
While a CO line call, you can record the conversation and it will be saved in its own mailbox.
Range
