Replacing the filter
1. Remove the cover and replace the filter.
2. Once you have replaced the filter, disable the filter
replacement alert.
• Press the 'Filter Replacement' button on the filter
management menu in the Puricare Mini app to cancel the
notice. When the filter replacement notice is cancelled, the
replacement notice time and the remaining filter level will be
initialized.
Cleaning the product exterior
1. Remove dust from the air
inlet and outlet using a
vacuum cleaner.
2. Wipe the exterior with soft
cloth.
NOTE
• Do not store the appliance at a humid place or at a place
exposed to the direct sunlight.
• Fully charge the battery if you wish to use it again after leaving
it for a long period of time.
• If you keep the product unused for an extended period of time,
you should fully charge the battery every 6 months.
• If you keep the product unused for an extended period time
with the battery not fully charged, the battery may fail.
Storage
If the appliance is not used for a long period of time, store it in a
shaded and dry place.
1. Operate the product for one hour or more on a fine day.
This removes the moisture and prevents molds from building
up inside the product.
2. Separate the charging cable from the product which is
operating and turn off the product completely by pressing the
power button for at least 5 seconds.
3. Package the appliance to prevent the dust or foreign
substance from entering the appliance. Store the packaged
appliance at a shaded place.
Symptoms
Solution
The appliance
does not
operate.
• Charge the battery.
• Make sure that the ambient temperature is not
excessively high or low.
• Use an adapter of 1.8 A or higher.
Fan is noisy even
on the lowest
speed.
• Thoroughly clean the ultra-fine filter.
• Replace the filter.
The indoor air is
not purified well
enough.
• Ventilate the indoor air before you use the product.
• Clean the ultra-fine filter properly.
• Replace the filter.
• Use a product that fits the size of the room.
• Avoid a well-ventilated place such as a gate, window,
etc.
• Remove the obstacle.
• Move the appliance and install it again.
The light of air
quality continues
to stay red.
• If the amount of particles is more than the capacity of
the product, the display may not change.
• Turn the product off and on by pressing the Start/Stop
button.
• Do not use spray near the product.
The
concentration of
particles may
not change.
In a closed space, the cleanliness level may continue to
stay the same without change.
The
concentration of
particles
continues to
remain high.
In an environment or open space where outside air is
supplied continuously, the concentration may continue to
remain high.
A strange odour
comes out from
the air outlet as
well as the filter.
• In a place with a lot of smoke or odour, the air cleaning
function may deteriorate. Ventilate the room first and
then use the product.
• Replace the filter. The filter replacement frequency may
differ depending on the usage environment.
Bluetooth pairing
cannot be done.
• Shut down the Bluetooth setting on the smartphone,
and then try again.
• Make sure that the Bluetooth setting is turned on.
• Keep clear of obstacles between the product and the
smart phone.
• Depending on the type of smartphone or the
surrounding environment, Bluetooth pairing may not
work well.
TROUBLESHOOTING
CAUTION
!
• Do not wipe the appliance surface using sulfuric acid,
hydrochloric acid or organic solvent (thinner, kerosene etc.) or
attach a sticker on the appliance.
• Do not allow the water enter inside the appliance.
CAUTION
!
• Do not store the appliance on the dashboard of a vehicle. Doing
so may cause explosion, fire or performance degradation as
direct sunlight may increase temperature.
SMART FUNCTIONS
Using the air quality monitoring function
You can execute the Puricare Mini app and set the time to turn
on the particles sensor through the product management menu.
- Turns On with Product
- Always On: Monitor the air quality even when product
operation is suspended
NOTE
• The concentration of particles could be affected by cooking or
using humidifiers, sprays or other products which generate
steam or fine particles.
• Even two products placed in the same space could measure
the concentration of particles differently due to air circulation.
• The concentration of the particles displayed may change with
environmental factors such as the presence of sofas, beds,
carpets, vacuum cleaners, humidity, smoke, bugs, pets or
cooking oils.
• The PM concentration may be affected by changes in the
outside environment such as construction, heavy traffic or
pollen.
• The concentration of the particles could be higher near outside
doors, windows, vents or in areas where outside air enters. Air
flow near the particles sensor may interrupt normal operation
of the particles sensor and indicated concentration may be
different from actual particles concentration, accordingly.
• Be careful as the battery may be discharged rapidly when the
air quality monitoring function is used.
• PM (particulate matter) concentration is displayed in
increments of 1 unit, from 8 to 999. PM concentration values
are based on the data sheet provided by the sensor
manufacturer.
• The PM concentration measurement was tested using LG
Electronics’ standard test materials.
Bluetooth Module Specifications
Wireless function S/W version : V 1.0
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open
source licenses, that is contained in this product, please visit
http://opensource.lge.com. In addition to the source code, all
referred license terms, warranty disclaimers and copyright
notices are available for download.
LG Electronics will also provide open source code to you on
CD-ROM for a charge covering the cost of performing such
distribution (such as the cost of media, shipping, and handling)
upon email request to [email protected]. This offer is valid
for a period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of this
information.
Pairing
Pairing is a process of mutual registration of Bluetooth devices.
Once pairing is complete, no further pairing is required.
1. Execute the Puricare Mini app on the smartphone and press
the Start Registration button.
2. Press the Speed button on the product for 3 seconds or more.
3. After confirming that the Bluetooth indicator lamp of the
product blinks, begin pairing.
4. Select a product to register from the app screen on your
smartphone.
5. When the Bluetooth connection between this app and the
product is established, the Bluetooth indicator lamp on the
product will turn on.
6. If pairing with the smartphone is not established within 3
minutes, the Bluetooth indicator lamp will turn off.
NOTE
• When connecting the product with your smartphone, use
the product as close as possible. In any of the following
cases, the Bluetooth function may not work properly even
at close range.
- If there is an obstacle or a person between the product and
the smartphone
- If a device that uses the same frequency with the Bluetooth
such as a medical device, microwave oven or wireless LAN is
near the product and the smartphone, the pairing may fail due
to interference from other radio waves.
•
The Bluetooth function may not operate depending on the
specifications of the smartphone.
•
Even if you turn off the product, the product will enter the
stand-by mode, allowing you to operate the product through
the connected smartphone.
•
If the distance between the product and the smartphone
increases, the Bluetooth connection will be disconnected.
•
The Bluetooth connection status of this product can be
checked through the Bluetooth indicator lamp ON/OFF on the
product. (When the connection is established, the Bluetooth
indicator lamp will turn on.)
• When you use multiple products connected on a single mobile
phone, you can select the desired product by scrolling through
the screen from the left to the right.
• It is recommended to use the PuriCare Mini app on Android
version 8.0 or higher.
Bluetooth function
Use the following functions through the smartphone connected
with this product.
1. You can start/stop the product.
2. You can adjust the Speed to 7 levels manually.
3. You can adjust purifying mode to Auto/Manual/Turbo mode.
4. You can check current air conditions, and the concentration of
the particles by numeric value.
5. You can set the air quality monitoring.
6. You can check the history of contamination levels.
7. You can manage the filter (service life and replacement cycle).
8. You can turn on and off the product automatically.
Refer to help in the application for detailed functions.
NOTE
• If the concentration of the particles is kept high even after
changing the operation environment, visit your customer
service centre to clean the particles sensor.
The concentration of the particles can be checked using the
Puricare Mini app.
Using the Puricare Mini Bluetooth app
You can use the product more conveniently by installing
the Puricare Mini Bluetooth app on your smartphone.
Installing the Puricare Mini app
Search for and install PuriCare Mini app from Google
Play or the Apple App store on your smartphone. Refer to
help in the application for detailed instructions.
Appearance and specifications may vary without notice to
improve the quality of the appliance.
“The Bluetooth
®
word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by LG
Electronics Inc. is under license. Other trademarks and trade names
are those of their respective owners.”
Product
Power
5 V
1.8 A (AC adapter)
Built-in rechargeable battery
Rated power
consumption
12 W
Exterior dimensions
(W*D*H)
69 mm x 64 mm x 200 mm
Service temperature 5~40 °C
Service humidity
70 % or less
Battery
Capacity
(Typ) 3 600 mAh, 13.32 Wh
(Min) 3 500 mAh, 12.95 Wh
PRODUCT SPECIFICATIONS
WARNING
• Make sure to stop battery charging and product operation
before cleaning and replacing the filter.
• Do not spray water directly on the appliance.
Scheduled maintenance
!
Component
Cleaning frequency
Replacement
frequency
Ultra-fine filter
If contaminated,
clean the ultra-fine
filter with a vacuum
cleaner or soft brush
(monthly).
6 months
MAINTENANCE
Allergen
filter
Ultra-fine
filter
Cleaning the ultra-fine filter
1. Remove the filter cover from the
product.
2. Remove dust from the ultra-fine
filter with a vacuum cleaner or a
soft brush.
NOTE
• The operating environment and operation hours may affect the
replacement frequency.
• Noise may occur if the filter is contaminated.
• If it is necessary to replace the filter, contact a nearby service
centre.
• A filter is a consumable item. Therefore you must buy a new
one for replacement when it has reached the end of its lifespan
even during the warranty period. Contact the LG Electronics
service centre or consumables shop on the LG Electronics site
(www.lg.com).
Ultra-fine
filter
NOTE
• Do not wash the filter with water.
• Be careful not to damage the ultra-fine filter when you use a
vacuum cleaner.
Overall
Air Quality
Concentration of the particles
(μg/m
3
)
Color
State
PM10
(coarse
particles)
PM2.5
(fine
particles)
PM1.0
(particles with
a diameter
between 1.0
and 2.5 µm)
Red
Poor
255 or
more
56 or
more
56 or
more
Orange Unhealthy 155-254
36-55
36-55
Yellow Moderate
55-154
13-35
13-35
Green
Good
54 or less 12 or less
12 or less
Model
LCB-001
Frequency Range
2 402 MHz 2 480 MHz
Output Power (Max)
7.33 dBm
Replacing the filter
1. Remove the cover and replace the filter.
2. Once you have replaced the filter, disable the filter
replacement alert.
• Press the 'Filter Replacement' button on the filter
management menu in the Puricare Mini app to cancel the
notice. When the filter replacement notice is cancelled, the
replacement notice time and the remaining filter level will be
initialized.
Cleaning the product exterior
1. Remove dust from the air
inlet and outlet using a
vacuum cleaner.
2. Wipe the exterior with soft
cloth.
NOTE
• Do not store the appliance at a humid place or at a place
exposed to the direct sunlight.
• Fully charge the battery if you wish to use it again after leaving
it for a long period of time.
• If you keep the product unused for an extended period of time,
you should fully charge the battery every 6 months.
• If you keep the product unused for an extended period time
with the battery not fully charged, the battery may fail.
Storage
If the appliance is not used for a long period of time, store it in a
shaded and dry place.
1. Operate the product for one hour or more on a fine day.
This removes the moisture and prevents molds from building
up inside the product.
2. Separate the charging cable from the product which is
operating and turn off the product completely by pressing the
power button for at least 5 seconds.
3. Package the appliance to prevent the dust or foreign
substance from entering the appliance. Store the packaged
appliance at a shaded place.
Symptoms
Solution
The appliance
does not
operate.
• Charge the battery.
• Make sure that the ambient temperature is not
excessively high or low.
• Use an adapter of 1.8 A or higher.
Fan is noisy even
on the lowest
speed.
• Thoroughly clean the ultra-fine filter.
• Replace the filter.
The indoor air is
not purified well
enough.
• Ventilate the indoor air before you use the product.
• Clean the ultra-fine filter properly.
• Replace the filter.
• Use a product that fits the size of the room.
• Avoid a well-ventilated place such as a gate, window,
etc.
• Remove the obstacle.
• Move the appliance and install it again.
The light of air
quality continues
to stay red.
• If the amount of particles is more than the capacity of
the product, the display may not change.
• Turn the product off and on by pressing the Start/Stop
button.
• Do not use spray near the product.
The
concentration of
particles may
not change.
In a closed space, the cleanliness level may continue to
stay the same without change.
The
concentration of
particles
continues to
remain high.
In an environment or open space where outside air is
supplied continuously, the concentration may continue to
remain high.
A strange odour
comes out from
the air outlet as
well as the filter.
• In a place with a lot of smoke or odour, the air cleaning
function may deteriorate. Ventilate the room first and
then use the product.
• Replace the filter. The filter replacement frequency may
differ depending on the usage environment.
Bluetooth pairing
cannot be done.
• Shut down the Bluetooth setting on the smartphone,
and then try again.
• Make sure that the Bluetooth setting is turned on.
• Keep clear of obstacles between the product and the
smart phone.
• Depending on the type of smartphone or the
surrounding environment, Bluetooth pairing may not
work well.
TROUBLESHOOTING
CAUTION
!
• Do not wipe the appliance surface using sulfuric acid,
hydrochloric acid or organic solvent (thinner, kerosene etc.) or
attach a sticker on the appliance.
• Do not allow the water enter inside the appliance.
CAUTION
!
• Do not store the appliance on the dashboard of a vehicle. Doing
so may cause explosion, fire or performance degradation as
direct sunlight may increase temperature.
SMART FUNCTIONS
Using the air quality monitoring function
You can execute the Puricare Mini app and set the time to turn
on the particles sensor through the product management menu.
- Turns On with Product
- Always On: Monitor the air quality even when product
operation is suspended
NOTE
• The concentration of particles could be affected by cooking or
using humidifiers, sprays or other products which generate
steam or fine particles.
• Even two products placed in the same space could measure
the concentration of particles differently due to air circulation.
• The concentration of the particles displayed may change with
environmental factors such as the presence of sofas, beds,
carpets, vacuum cleaners, humidity, smoke, bugs, pets or
cooking oils.
• The PM concentration may be affected by changes in the
outside environment such as construction, heavy traffic or
pollen.
• The concentration of the particles could be higher near outside
doors, windows, vents or in areas where outside air enters. Air
flow near the particles sensor may interrupt normal operation
of the particles sensor and indicated concentration may be
different from actual particles concentration, accordingly.
• Be careful as the battery may be discharged rapidly when the
air quality monitoring function is used.
• PM (particulate matter) concentration is displayed in
increments of 1 unit, from 8 to 999. PM concentration values
are based on the data sheet provided by the sensor
manufacturer.
• The PM concentration measurement was tested using LG
Electronics’ standard test materials.
Bluetooth Module Specifications
Wireless function S/W version : V 1.0
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open
source licenses, that is contained in this product, please visit
http://opensource.lge.com. In addition to the source code, all
referred license terms, warranty disclaimers and copyright
notices are available for download.
LG Electronics will also provide open source code to you on
CD-ROM for a charge covering the cost of performing such
distribution (such as the cost of media, shipping, and handling)
upon email request to [email protected]. This offer is valid
for a period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of this
information.
Pairing
Pairing is a process of mutual registration of Bluetooth devices.
Once pairing is complete, no further pairing is required.
1. Execute the Puricare Mini app on the smartphone and press
the Start Registration button.
2. Press the Speed button on the product for 3 seconds or more.
3. After confirming that the Bluetooth indicator lamp of the
product blinks, begin pairing.
4. Select a product to register from the app screen on your
smartphone.
5. When the Bluetooth connection between this app and the
product is established, the Bluetooth indicator lamp on the
product will turn on.
6. If pairing with the smartphone is not established within 3
minutes, the Bluetooth indicator lamp will turn off.
NOTE
• When connecting the product with your smartphone, use
the product as close as possible. In any of the following
cases, the Bluetooth function may not work properly even
at close range.
- If there is an obstacle or a person between the product and
the smartphone
- If a device that uses the same frequency with the Bluetooth
such as a medical device, microwave oven or wireless LAN is
near the product and the smartphone, the pairing may fail due
to interference from other radio waves.
•
The Bluetooth function may not operate depending on the
specifications of the smartphone.
•
Even if you turn off the product, the product will enter the
stand-by mode, allowing you to operate the product through
the connected smartphone.
•
If the distance between the product and the smartphone
increases, the Bluetooth connection will be disconnected.
•
The Bluetooth connection status of this product can be
checked through the Bluetooth indicator lamp ON/OFF on the
product. (When the connection is established, the Bluetooth
indicator lamp will turn on.)
• When you use multiple products connected on a single mobile
phone, you can select the desired product by scrolling through
the screen from the left to the right.
• It is recommended to use the PuriCare Mini app on Android
version 8.0 or higher.
Bluetooth function
Use the following functions through the smartphone connected
with this product.
1. You can start/stop the product.
2. You can adjust the Speed to 7 levels manually.
3. You can adjust purifying mode to Auto/Manual/Turbo mode.
4. You can check current air conditions, and the concentration of
the particles by numeric value.
5. You can set the air quality monitoring.
6. You can check the history of contamination levels.
7. You can manage the filter (service life and replacement cycle).
8. You can turn on and off the product automatically.
Refer to help in the application for detailed functions.
NOTE
• If the concentration of the particles is kept high even after
changing the operation environment, visit your customer
service centre to clean the particles sensor.
The concentration of the particles can be checked using the
Puricare Mini app.
Using the Puricare Mini Bluetooth app
You can use the product more conveniently by installing
the Puricare Mini Bluetooth app on your smartphone.
Installing the Puricare Mini app
Search for and install PuriCare Mini app from Google
Play or the Apple App store on your smartphone. Refer to
help in the application for detailed instructions.
Appearance and specifications may vary without notice to
improve the quality of the appliance.
“The Bluetooth
®
word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by LG
Electronics Inc. is under license. Other trademarks and trade names
are those of their respective owners.”
Product
Power
5 V
1.8 A (AC adapter)
Built-in rechargeable battery
Rated power
consumption
12 W
Exterior dimensions
(W*D*H)
69 mm x 64 mm x 200 mm
Service temperature 5~40 °C
Service humidity
70 % or less
Battery
Capacity
(Typ) 3 600 mAh, 13.32 Wh
(Min) 3 500 mAh, 12.95 Wh
PRODUCT SPECIFICATIONS
WARNING
• Make sure to stop battery charging and product operation
before cleaning and replacing the filter.
• Do not spray water directly on the appliance.
Scheduled maintenance
!
Component
Cleaning frequency
Replacement
frequency
Ultra-fine filter
If contaminated,
clean the ultra-fine
filter with a vacuum
cleaner or soft brush
(monthly).
6 months
MAINTENANCE
Allergen
filter
Ultra-fine
filter
Cleaning the ultra-fine filter
1. Remove the filter cover from the
product.
2. Remove dust from the ultra-fine
filter with a vacuum cleaner or a
soft brush.
NOTE
• The operating environment and operation hours may affect the
replacement frequency.
• Noise may occur if the filter is contaminated.
• If it is necessary to replace the filter, contact a nearby service
centre.
• A filter is a consumable item. Therefore you must buy a new
one for replacement when it has reached the end of its lifespan
even during the warranty period. Contact the LG Electronics
service centre or consumables shop on the LG Electronics site
(www.lg.com).
Ultra-fine
filter
NOTE
• Do not wash the filter with water.
• Be careful not to damage the ultra-fine filter when you use a
vacuum cleaner.
Overall
Air Quality
Concentration of the particles
(μg/m
3
)
Color
State
PM10
(coarse
particles)
PM2.5
(fine
particles)
PM1.0
(particles with
a diameter
between 1.0
and 2.5 µm)
Red
Poor
255 or
more
56 or
more
56 or
more
Orange Unhealthy 155-254
36-55
36-55
Yellow Moderate
55-154
13-35
13-35
Green
Good
54 or less 12 or less
12 or less
Model
LCB-001
Frequency Range
2 402 MHz 2 480 MHz
Output Power (Max)
7.33 dBm
