Installation
Service Manual 63
• Install the unit leaning to drainage hole side as a
figure for easy water drainage.
• A place where the unit will be leveled and can
support the weight of the unit.
• A place where the unit can withstand its vibration.
• A place where service can be easily performed.
• Select and mark the position for fixing bolts.
• Drill the hole to set anchor on the face of ceiling.
• Insert the set anchor and washer onto the
suspension bolts for locking the suspension bolts
on the ceiling.
• Mount the suspension bolts to the set anchor
firmly.
• Secure the installation plates onto the suspension
bolts (adjust level roughly) using nuts, washers
and spring washers.
CASE 2
POSITION OF CONSOLE BOLT
M10 Nut
M10 SP. washer
M10 washer
X 4
X 4
(Local
supply)
X 4
M10 Nut
M10 SP. washer
M10 washer
X 4
X 4
(Local
supply)
X 4
1 Set anchor
Old building
New building
2 Plate washer
3 Spring washer
4 Nut
5 Suspension
bolts
Tighten the nut and bolt to prevent
unit falling
CAUTION
• Local supply
Set anchor
Plate washer
- M10
Spring washer
- M10
Nut
- W3/8 or M10
Suspension bolt
- W3/8 or M10
Summary of Contents for ABNC186HLAA
