Damper Controller
• Open the cover of indoor unit control box and damper controller(Figure 1)
• Assemble the damper controller to cover which is seperated.
• Connect the lead wires between main PCB and damper controller.(Figure 2)
• Connect the power cord to damper controller and actuator.(Figure 2)
• Assemble the damper controller to indoor unit and then assemble cover of damper controller.
• Set the slide switch in the wired remote contorller as "1" positon.(Figure 3)
• Refer to damper controller Installation manual for detailed installation metheod.
(It is possible to use 2-position control actuator(on/off) or 3-position control actuator(on/off).)
32
ACCESSORY INSTALLATION GUIDE
ENGLISH
Remote controller
Zone type selection
1 1. Zone new
2 2. Zone old
S/W 1
Power
supply
Damper controller
Actuator Actuator Actuator Actuator
Indoor PCB
Figure 1
Figure 3
Figure 2
Summary of Contents for AB-W3067SA3
Page 37: ......
