LG AB-W3067SA3, Installation Manual

Page: 7 / 37

INSTALLATION PLACES
ENGLISH
7
Indoor unit
- The place shall easily bear a load exceeding
four times the indoor unit’s weight.
- The place shall be able to inspect the unit as
the figure.
- The place where the unit shall be leveled.
- The place shall allow easy water drainage.
- The place shall easily connect with the out-
door unit.
- The place where the unit is not affected by
an electrical noise.
- The place where air circulation in the room
will be good .
- There should not be any heat source or
steam near the unit
* Suitable dimension “H” is necessary to get
a slope to drain as figure.
Outdoor unit
- If an awning is built over the unit to prevent
direct sunlight or rain exposure, make sure
that heat radiation from the condenser is not
restricted.
- Ensure that the spaces indicated by arrows
around front, back and side of the unit.
- Do not place animals and plants in the path
of the warm air.
- Take the air conditioner weight into account
and select a place where noise and vibration
are minimum.
- Select a place so that the warm air and noise
from the air conditioner do not disturb neigh-
bors.
H=200 or more
Top view
(unit: mm)
Front view
(unit: mm)
Front
Inspection hole
(600 x 600)
Control box
1000
More than
300
More than 700
More than 600
More than More than
300 300
Sunr
oof
Fence or
obstacles
OUTDOOR OU
TD
OO
R
Un
it
Un
it
OUTD
OO
R
Unit
More than
300
Unit : mm
INSTALLATION PLACES