ENGLISH
44
CLOCK SETUP
CLOCk SETUP
(* Only for LW54*H series)
y
y
Image shown may differ from your TV.
Clock Display
Dimming Standby
Dimming PowerOn
Clock Source
Input
Program/Frequency
Time Zone (City)
(Offset)
IP Address
Clock Setup
70
Previous
OK
OFF
OFF
London
No
15
◄
No
►
GMT
0.0.0.0:0
OFF
Installation Menu (V 3.0)
Set ID Setup
Configuration Setup
Time Scheduler
Lock Mode
External Speaker
HCEC Setup
Insert Image
Network Setup
Pro:Centric
Power Saving
OK
S/W : 00.02.00.01 Micom : 0.00.32
Clock Setup
1
Press the
and
buttons to select the Clock Setup.
2
You can select ‘YES’ or ‘NO’ by pressing
and
button.
y
y
After selecting ‘YES’, you can see the LED Clock TV.
- Standby Dimming value Range: 0~15
- PowerOn Dimming value Range: 0~99
y
y
Clock Source
: You can select ‘Off’, ‘TV’, ‘Pro:Centric’ by pressing < > button.
y
y
Input
: Select a specific source to receive time information from. When the Clock Source is set to
TV, the available options are: Off, ATV, DTV, RADIO, CATV, CADTV, CA-Radio, SDTV, and S-Radio.
When it is set to Pro:Centric, the available options are RF and IP. If RF is selected, you can set the
Program/Frequency to receive time information. If IP is selected, the Program/Frequency option is
disabled. You can set the IP address and port number to receive time information.
y
y
Program/Frequency
: Select the program number or frequency to get the time information when
tuning on TV. If the current setting for clock source is ‘DTV’, you can get the clock information when
selecting the decided source and program. If the current setting for clock source is ‘ATV’, you can
get the clock information of teletext at the number of program. Set up the program in accordance
with the condition of the hotel clock source.
y
y
Time Zone
: The city corresponding to the state designated in the TV settings is set as default. You
can change the selected city to Offset. If the selected city is changed to Offset, you can change the
time value from GMT+12 to GMT-11.
y
y
IP Address
: You can set the IP address and port number to receive time information.
NOTE
y
Options of Clock Display, Dimming Standby and Dimming PowerOn are only available for the
models that support the external LED clock.
y
For clock setup, select ‘YES’ for Clock Display only if the LED clock is connected to your TV. If you
do not use the LED clock, select ‘NO’ for Clock Display. If you connect an external device, other
than the LED clock, to the port for the LED clock connection on the TV, it may cause damage to the
TV.
y
If the current setting for clock source is ‘Pro:Centric’, ‘City’ and ‘Offset’ deactivates.
Summary of Contents for 49LW310C.BTR
Page 57: ......
