LG 49LW310C.BTR, Installation Manual

Page: 29 / 57

ENGLISH
29
CONFIGURATION SETUP
7 Forced DVI Audio (* Except for LW54*H series)
y
When Forced DVI Audio is selected, the audio signal from the HDMI port will be transmitted through
the RGB, AV, or Audio In #1 component ports.
y
The video signal will be transmitted through HDMI to be displayed on the screen in standard quality.
8 Screen Saver Cube
y
When ‘Screen Saver Cube’ is set to ‘No’, TV will do not display LG Screen Cube.
9 One Channel Map
y
If 'One Channel Map' is 'YES', the TV will operate as below.
A. When the TV is auto-scanning, it searches both air and cable channels.
B. In ‘Programme Edit’ window, all channels are shown in a single list regardless of input source.
(DTV/RADIO/TV) (For satellite supported models, a Satellite input source is also included.)
C. Select the ‘Auto Sort’ button in the ‘Programme Edit’ window to sort channels sequentially.
10 DVB-C
y y
DVB-T/C programmes (channels) are searchable and selectable like following if DVB-C is “Yes”.
A. Country which uses analog only
- DVB-T(DTV) can be tuned.
VHF : 5 – 12 ( 7M Band)
UHF : 21 – 69 ( 8M Band)
- DVB-C is able to be tuned.
Frequency : 50000 – 858000 ( 8M Band)
B. Country which uses DVB-T(DTV)
- DVB-C is able to be tuned.
Frequency : 50000 – 858000 ( 8M Band)
11 DVB-C Bandwidth
y
If country is ‘Philippines’, ‘DVB-C Bandwidth’ menu will be shown.
y
Select the bandwidth of cable tuning.(6Mhz/8Mhz). The default is 6Mhz.
12 RS232 DC Power Outlet (* Only for LW54*H series)
y
It is a mode to decide whether to output DC or not for power supply to IB Box in Installation Menu.
We offer a output terminal in one Pin of RS232C Jack for the use of communication.
y
5V DC Power Outlet and 12V DC Power Outlet must operate mutually exclusively. That is, only one of
the two sides must be turned on.
y
You can select ‘ OFF ’, ‘ 5V ’ or ‘ 12V ’ by pressing < > button.
RS-232C IN
(CONTROL & SERVICE)