LG 49LW310C.BTR, Installation Manual

Page: 15 / 57

ENGLISH
15
INSTALLATION MENU
8 Power On Default
Set the input source or channel to display and. A/V settings when turn on power in AC Power On or
Stand-by status.
- Input Source
Set whether it is turned on by the set input source or by the last stored input source.
y y
It is turned on by the Last Memory Input if the Input source is turned off.
y y
It is turned on by the Last Pr. If the Input source is turned off and the last memory Input is the
RF.
y y
The available Input Source values should be rotated.
y y
If both the Input source and the ‘On Time’ menu are set, the Input source takes the priority.
y y
When the Input source is changed to the TV, Programme menu is available.
y y
When the Input source is changed to the ATV, the Program No. is set to 0. (If the channel map
structure does not support this, it depends on model’s channel handling.
y y
Access to an input source item and a channel in ‘On Timer’ menu must be disabled when
Power On Default is activated.
- Programme
Select start channel number if Input source’s value is TV. (in case of ATV, it means physical
channel number.)
- A/V Setting
If ‘A/V Setting’ is changed from ‘No’ to ‘Yes’, parameters that are set before entering ‘Installation
Menu’ are applied whenever turn on power.
y y
Following Parameters are applied to basic.
» Picture section - PSM mode, Picture Data (Contrast, Brightness, Color, Sharpness, Tint)
»
Sound section - SSM mode, Sound Data (Balance, Equalizer Data)
» AVL (Auto Volume Level) and Language, Teletext language, ARC Data. Except these, other
parameters are applied differently according to the TV-Set.
- Aspect Ratio
The aspect ratio determines the default aspect ratio that the set returns to on power up.
y y
The modes are as follows:
»
Aspect ratio = “Disable(0)” stays at previous state, same as consumer model.
» Aspect ratio = “Original(1)”
» Aspect ratio = “4:3 ratio (2)”
»
Aspect ratio = “16:9 ratio (3)”
y y
If enabled, upon power up the television reset the aspect ratio to the specified state regardless
of how the user has previously changed the aspect ratio.
(If "original" is not supported, the television set the aspect ratio to "16:9".)
9 Aux Source Setting
The Auxiliary (Input) Source Setting feature will enable or disable for each external input. When ‘Aux
Source Setting’ is set to Yes(Work), the RJP or HDMI-CEC / HTNG will not operate.
- Input Source
y y
Available Input Source List
- Setting
y y
Decide whether selected ‘Input Source’ is usable (Enable) or not (Disable).
y y
User cannot disable the current input’s ‘Aux Source Setting’.
10 Radio Name Display
Instead of ‘Audio Only’, the name of a radio channel is displayed on the screen when a radio broadcast
is playing.
y y
Set to Yes(Work) or No(Do Not Work).
y y
If the setting is ‘Yes’, the name of a radio channel is displayed for the radio channel.