LG 49LW310C.BTR Page 42 Installation Manual Download

Page: 42 / 57

ENGLISH

WELCOME VIDEO

wELCOME VIDEO

Image shown may differ from your TV.

Installation Menu (V 3.0)

LG Hotel Mode Setup

TV Manager

Password Change
Set ID Setup
Configuration Setup
Time Scheduler
Lock Mode

External Speaker
HCEC Setup
Insert Image
Welcome Video

S/W : 00.02.00.01 Micom : 0.00.32

welcome Video

Welcome Video
Video Reset

Welcome Video

◄

Disable

►

Confirm

This feature allows you to download Video via USB storage to display on your TV after your TV boots

up and the boot logo appears.

Select Welcome Video with the

and

buttons and then press the

button.

Welcome Video

You can set to Off, Once or Repeat using the < and > buttons.

Video Reset

Delete downloaded video and reset the feature back to default.

NOTE

Operation

The video displays after your TV is turned on and the boot logo appears.

If Welcome Video is enabled and a video is downloaded on the TV, the video plays.

The time it takes a video to be displayed may differ depending on the decoding time of the video.

In case of a corrupted or damaged file, the video may abruptly stop without an error displayed.

The timer features such as Off Timer and Sleep Timer are not available during playback.

USB Autoplayback starts after the Welcome Video.

Controls for playing the video are not available. (Pause, stop, fast forward, etc.)

Using the keys

Only eight keys(Vol +, Vol -, Mute, OK, Exit, CH up, CH down and Back) can be used while

playing video.

The OK, Exit, CH up, CH down, or Back key can cancel playing a video.

Using RS232C

Only the following commands work: KE(mute), KF(volume), and MC(data – volume, mute, ch).

Downloading

Video in any file format that the TV supports can be downloaded and displayed.

Video up to 50MB can be downloaded.

For detailed information about downloading video, go to TV Manager > Ez Download.

Please do not use the ampersand character(&) and the left angle bracket (<) in the filename to

use DZM file on EZ Download.

Summary of Contents for 49LW310C.BTR


























































Search results

Summary of Contents for 49LW310C.BTR

Reviews:

Related manuals for 49LW310C.BTR

Brands by name

Popular brands

LG 49LW310C.BTR, Installation Manual

Search results

Summary of Contents for 49LW310C.BTR

Reviews:

Related manuals for 49LW310C.BTR

Brands by name

Popular brands