52
ENG
ENGLISH
EXTERNAL CONTROL DEVICE SETUP
20. Tile H Position (Command: d e)
To set the Horizontal position.
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 14H
00H : Step -10(Left)
14H : Step 10(Right)
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
21. Tile V Position (Command: d f)
To set the Vertical position.
Transmission
[d][f][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 14H
00H : Step -10(Down)
14H : Step 10(Up)
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
22. Tile H Size (Command: d g)
To set the Horizontal size.
Transmission
[d][g][ ][Set ID][ ][Data][x]
Data Min : 00H to Max : 64H
* Refer to 'Real data mapping ’. See p.50
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
17. Auto Configure (Command: j u)
To adjust picture position and minimize image
shaking.
Automatically. NB : Only applies to RGB(PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 01 : To set
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
18. Key (Command: m c)
To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code : Refer to ‘IR CODES’. See p.44
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
19. Tile Mode (Command: d d)
Change a Tile Mode.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data
Description
00 or 11
Tile mode is off.
12
1 x 2 mode (column x row)
13
1 x 3 mode
14
1 x 4 mode
...
...
55
1 x 2 mode
* The data can not be set to 0X or X0 except 00.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
