LG 42PJ250-ZC, Owner'S Manual

Page: 137 / 156

119
APPENDIX
0 08 8.. C Co ollo ou urr ((C Co om mm maan nd d:: kk ii ))
G
To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Transmission
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 121.
[k][i][ ][Set ID][ ][Data][Cr]
Ack
[i][ ][Set ID][ ][OK/NG][Data][x]
0 04 4.. V Vo ollu um mee M Mu uttee ((C Co om mm maan nd d:: kk ee ))
G
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
[k][e][ ][Set ID][ ][Data][Cr]
Ack
[e][ ][Set ID][ ][OK/NG][Data][x]
0 02 2.. A Assp peecctt R Raattiio o ((C Co om mm maan nd d:: kk cc)) ((M Maaiinn PPiiccttuurree S Siizzee))
G
To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
A
Assp peecctt R Raattiio o in the Q.MENU. or PICTURE menu.
Transmission
Data 01 : Normal screen (4:3)
02 : Wide screen (16:9)
04 : Zoom
06 : Original
07 : 14:9
09 : Just Scan
0B : Full Wide
10 to 1F : Cinema Zom 1 to 16
[k][c][ ][Set ID][ ][Data][Cr]
Ack
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV/HDMI (1080i 50 H z/60 Hz , 720p 50 Hz /
60 Hz, 1080p 24 Hz / 30 Hz / 50 Hz / 60 Hz),
Component(720p, 1080i, 1080p 50 Hz / 60 Hz)
mode,
Just Scan is available.
* FFu
ullll W Wiid dee is supported only for
Analogue ,
AV1,2,3(Except for 42/50PJ2**, 50/60PK2**).
[c][ ][Set ID][ ][OK/NG][Data][x]
0 03 3.. S Sccrreeeen n M Mu uttee ((C Co om mm maan nd d:: kk d d ))
G To select screen mute on/off.
Transmission
Data 00 : Screen mute off (Picture on)
Video mute off
01 : Screen mute on (Picture off)
10 : Video mute on
* In case of video mute on only, TV will display On Screen
Display(OSD). But, in case of Screen mute on, TV will not
display OSD.
[k][d][ ][Set ID][ ][Data][Cr]
Ack
[d][ ][Set ID][ ][OK/NG][Data][x]
0 05 5.. V Vo ollu um mee C Co on nttrro oll ((C Co om mm maan nd d:: kk ff ))
G
To adjust volume.
You can also adjust volume with the VOLUME buttons on
remote control.
Transmission
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 121.
[k][f][ ][Set ID][ ][Data][Cr]
Ack
[f][ ][Set ID][ ][OK/NG][Data][x]
0 06 6.. C Co on nttrraasstt ((C Co om mm maan nd d:: kk g g ))
G
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 121.
[k][g][ ][Set ID][ ][Data][Cr]
Ack
[g][ ][Set ID][ ][OK/NG][Data][x]
0 07 7.. B Brriig gh httn neessss ((C Co om mm maan nd d:: kk h h ))
G To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 121.
[k][h][ ][Set ID][ ][Data][Cr]
Ack
[h][ ][Set ID][ ][OK/NG][Data][x]
0 01 1.. P Po ow weerr ((C Co om mm maan nd d:: kk aa))
G
To control Power On/Off of the set.
Transmission
Data 00 : Power Off 01 : Power On
[k][a][ ][Set ID][ ][Data][Cr]
Ack
[a][ ][Set ID][ ][OK/NG][Data][x]
G
To show Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Ack
* Similarly, if other functions transmit ‘0xFF’ data based
on this format, Acknowledgement data feed back pre-
sents status about each function.
* OK Ack., Error Ack. and other message may display on
the screen when TV is power On.
[a][ ][Set ID][ ][OK/NG][Data][x]