manualshive.com logo in svg

LG 27HJ710S, Owner'S Manual, Page: 34 / 56

Share
Download
LG 27HJ710S Owner'S Manual Download Page 34

ENGLISH

34

Picture

Description

Picture Adjust

HDMI ULTRA HD Deep 

Color

Provides sharper images when connected to a device supporting 

ULTRA HD Deep Color. 

 NOTE

 

•

If the connected device does not support ULTRA HD Deep Color, the 

feature may not work properly.

 

•

If you experience a problem, set 

HDMI ULTRA HD Deep Color

 to 

Off

.

Formats supported at 4K@ 60 Hz

1)

Resolution

Frame rate 

(Hz)

Deep color / chroma sampling

8-bit

10-bit

3840 x 2160

59.94
60.00

YCbCr 4:2:0
YCbCr 4:2:2

YCbCr 4:4:4

-

RGB 4:4:4

-

1)  Supported when 

HDMI ULTRA HD Deep Color

 is set to 

ON

.

DFC

On

Adjusts the brightness automatically according to 

the screen.

Off

Disables the 

DFC

 feature.

Response Time

Sets the response time for displayed pictures based on the speed of 

the screen. 
For a normal environment, 

Normal

 is recommended. For a fast-

moving picture, 

Fast

 is recommended. Setting the response time to 

Fast

 may cause image sticking.

Fast

Sets the response time to fast.

Normal

Sets the response time to normal.

Slow

Sets the response time to slow.

Off

Does not use the response time improvement 

feature.

Black Stabilizer

Objects can be seen more clearly in dark screen picture by adjusting 

the black level.
Increasing the 

Black Stabilizer

 value brightens the low gray levels 

on the screen. (You can easily distinguish objects on a dark game 

screen.)
Reducing the 

Black Stabilizer

 value darkens the low gray levels and 

increases the dynamic contrast on the screen.

Summary of Contents for 27HJ710S

























































Reviews:

No comments