manualshive.com logo in svg

LG 27HJ710S, Owner'S Manual, Page: 19 / 56

Share
Download
LG 27HJ710S Owner'S Manual Download Page 19

ENGLISH

19

ASSEMBLY AND PREPARING

Product Composition

Please check whether all the components are included in the box before using the product. If there are any missing 

components, contact the retailer where you purchased the product. Note that the product and related components 

may look different from those shown here.

CD (Software/Owner's Manual)/

Regulatory Manual/Cards

Power Cord

AC/DC Adaptor

DisplayPort Cable

HDMI Cable

 CAUTION

 

•

Always use genuine LG components to ensure safety and product performance.

 

•

The product warranty will not cover damage or injury caused by the use of unauthorized components.

 

•

It is recommend that use the supplied components.

 

•

If you use generic cables not certified by LG, the screen may not display or there may be image noises.

 

•

Need to use the authorized components about the below accessories. Unauthorized components may be cause of the 

damage and malfunction of the product.

Component

Standard

HDMI Cable

Support HDMI 2.0 version, UL, Impedance 100ohm

DisplayPort Cable

Support DISPLAYPORT 1.2a version, UL, Impedance 100ohm

Power Cord

US – Approved Medical grade regulation
Others – Approved country safety regulation

The AC/DC adaptors and etc. except the upper components need to be used only supplied by manufacturer.

Summary of Contents for 27HJ710S

























































Reviews:

No comments